Page 66 / 116
Scroll up to view Page 61 - 65
62
D-Link DGL-5500 User Manual
Section 4 - Connecting to a Wireless Network
Windows® 8
1. Click on the wireless computer icon in your system tray (lower-right
corner next to the time).
2. A list of available wireless networks will appear.
3. Click the wireless network (SSID) you want to connect to and then
click
Connect
.
4. If the network is secure/encrypted, enter the Wi-Fi password
(security key) and click
Next
.
Page 67 / 116
63
D-Link DGL-5500 User Manual
Section 4 - Connecting to a Wireless Network
If you get a good signal but cannot access the Internet, confirm the encryption by reviewing the profile or check the TCP/IP
settings for your wireless adapter. Refer to the
Networking Basics
section in this manual for more information.
5. Click either to enable or disable file sharing.
6. You will now be connected to your wireless network.
Page 68 / 116
64
D-Link DGL-5500 User Manual
Section 4 - Connecting to a Wireless Network
Windows® 7
It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your
wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
WPA/WPA2
Page 69 / 116
65
D-Link DGL-5500 User Manual
Section 4 - Connecting to a Wireless Network
3. Highlight the wireless network (SSID) you would like to connect to
and click the
Connect
button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to
connect to the router.
Page 70 / 116
66
D-Link DGL-5500 User Manual
Section 4 - Connecting to a Wireless Network
5. Enter the same security key or passphrase that is on your router and
click
Connect
. You can also connect by pushing the WPS button on
the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
19216811.live