Page 21 / 37
Scroll up to view Page 16 - 20
Using the Configuration Interface
21
D-Link Systems, Inc.
Status > Device Info
This window displays the settings of the DGL-3420, as well as the firmware version, and the MAC
address.
Status > Statistics
Check the network statistics in this window.
Status > Device Info
Status > Statistics
Page 22 / 37
Using the Configuration Interface
22
D-Link Systems, Inc.
Help
At this window you can access the help screens for the topics listed.
Help
Page 23 / 37
Troubleshooting
23
D-Link Systems, Inc.
Troubleshooting
This section provides solutions to situations that can occur during the installation and operation of
the DGL-3420 Wireless Gaming Adapter.
1. What should I do if I encounter problems while
configuring the DGL-3420 using my Xbox?
For solutions to configuration problems that you encounter while using your Xbox, please go to the
following website:
If you are not using a DHCP capable router, or you need to assign a static IP address, please follow
these instructions:
Click on Start in the upper screen (shown at upper right).
Then click on Control Panel in that same screen
In the lower screen (shown at lower right), double-click on Control Panel.
2. How do I assign a static IP address in Windows XP/2000?
Please note that routers will automatically assign IP addresses to the computers on the network,
using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable
router you will not need to assign static IP addresses.
Page 24 / 37
Troubleshooting
24
D-Link Systems, Inc.
In the screen to the right please do the following:
Right-click on
Local Area Connections
.
Click
Properties
.
The screen below will appear.
Click
Internet Protocol
(TCP/IP)
.
Click
Properties
.
2. How do I assign a static IP address in Windows XP/2000? (continued)
Page 25 / 37
Troubleshooting
25
D-Link Systems, Inc.
2. How do I assign a static IP address in Windows XP/2000? (continued)
Select
Use the following IP address
.
Enter the
IP address
.
Enter the
Subnet mask
.
Enter the
Default Gateway
.
The Default Gateway is the LAN IP address of the wireless router.
D-Link
wireless
routers have a LAN IP address of 192.168.0.1
Select
Use the following DNS server address.
Enter the LAN IP address
of the wireless router. (D-Link wireless routers have a LAN IP address of
192.168.0.1)
The IP addresses on your network must be within the same range. For example, if
one computer has an IP address of
192.168.0.2, the other computers should have IP
addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must
be the same for all the computers on the network.
Click
OK
.
You have completed the assignment of a static IP address in Windows XP/2000!
In the screen at right, please do the following:
19216811.live