19216811.live36
DCS-950G User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
The
default
wireless channel setting is channel 6. Select the
channel that is the same as the other wireless devices on your
network.
Select between None, WEP, or WPA_PSK. None means that no
encryption will be set on the DCS-950G. WEP (Wired Equivalent
Privacy) will set encryption from 64 to 128 bits. If the security
mode is set to WPA-PSK (Wi-Fi Protected Access with pre-
shared key), the pre-shared key field must be filled.
Choose between Open or Shared Authentication. Open
Authentication communicates the key across the network.
Shared Authentication allows communication only with other
devices with identical WEP settings.
In WEP mode, you can select between 64-bit, 128-bit, and TKIP
mode. Both PSK and TKIP (Temporal Key Integrity Protocol)
will support up to 256-bit encryption.
Select an ASCII or hexadecimal key format.
Select the key to use as the default.
You can create up to 4 different security keys.
If encryption is enabled on the router or access point on your
network, the camera must share the same encryption key to
access the device.
Channel:
Security Mode:
Authentication:
Encryption Mode:
Key Format:
Default Key:
Key 1-4:
Pre-Shared Key: