21

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Setup Wizard

By default, the

Admin ID

and

Password

are “admin” (lower case). Enter this in both

fields. To change the Admin Password, select the

Change

box and enter a

New

Password

. Click

Next

.

The

IP Address

,

Subnet Mask

of your camera,

Gateway

, and

DNS

addresses

must

correspond with your network settings for you to access the camera.

If you are unsure

of what these settings should be, please check with your network administrator. Click

Next

.

22

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Setup Wizard

The Connection Mode depends on how your camera is connected to your network. Click

Infrastructure for use with a router or Adhoc for a peer-to-peer connection. The Network

Name, Wireless Channel, Security Mode, and Authentication type MUST correspond

with your wireless network settings for the camera to work. Click

Next

.

Enter the Encryption Mode, Key Format, and Encryption Keys for your wireless network.

Click

Next

.

23

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Setup Wizard

If you need to make any changes, click

Back

to modify your camera settings. Otherwise,

click

Restart

to save and apply your settings. This may take a few minutes

Your setup is now complete!

Wait until the Link LED on the camera begins to flash.

Click

Link

to launch your Web browser and view your images.

24

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Setup Wizard

Your camera is now displayed in the Web browser.

25

DCS-950G User’s Manual

D-Link Systems, Inc.

Using the Configuration Menu

After completing the Setup Wizard, you are ready to use your camera. The Web

configuration utility is designed to easily access and configure your DCS-950G. Clicking

the “Link” button will open up the main configuration page.

If you would like to open the configuration page from a Web Browser, enter the IP

address that you assigned to your DCS-950G.

Using the Configuration Menu

Home Screen

When you click on “Link”, the DCS-950G Home screen will appear. Use the following

displayed options to set up and view your Internet Camera:



Wizard



Setup



Audio On



Upside Down



Mirrored



Snap Shot



Log Out