Page 21 / 57
Scroll up to view Page 16 - 20
21
D-Link DCS-930 User Manual
Section 3 - Configuration
Setup > Image Setup
Select this box to enable antiflicker.
Select this box to vertically rotate the video. If the camera is installed upside down, Flip Image and Mirror should both be
checked.
Horizontally rotates the video.
Allows you to adjust the brightness level.
Allows you to adjust the contrast level.
Allows you to adjust the saturation level.
Enable
Antiflicker:
Flip Image:
Mirror:
Brightness
Control:
Contrast
Control:
Saturation
Control:
Image Settings
This section allows you to configure the image settings for your
camera.
Page 22 / 57
22
D-Link DCS-930 User Manual
Section 3 - Configuration
Setup > Video
Video Profile:
Light
Frequency:
Video Configuration
Encode Type:
Resolution:
FPS:
JPEG Quality:
View Mode:
The compression format used when viewing your camera.
Select the desired video resolution from three formats: 640x480, 320x240, and 160x120. The higher setting can
obtain better quality. However, it will use more resource within your network.
Select the optimal setting depending on your network status. Please note that the higher setting can obtain better
quality. However, it will use more resources within your network.
Choose one of five levels of image quality: Highest, High, Medium, Low, and Lowest.
Select the mode for viewing the camera image. Select Image for a still images, ActiveX for Internet Explorer, or
Java for other web browsers.
Select the proper frequency (50Hz or 60Hz) to reduce image flicker.
This section allows you to configure the video settings for
your camera.
This section allows you to change the
Encode Type
,
Resolution
,
FPS
, and
Quality
.
Page 23 / 57
23
D-Link DCS-930 User Manual
Section 3 - Configuration
Setup > Audio
Enabling audio setting will allow you to listen to audio from the camera
through your PC’s audio output.
Note:
Please wait a few seconds for the camera to adjust the audio
after the setting has been selected.
Audio Settings:
Volume
Settings:
You may
Enable
or
Disable
the camera audio feed.
Select the desired volume percentage level.
Page 24 / 57
24
D-Link DCS-930 User Manual
Section 3 - Configuration
Setup > Motion Detect
Enabling Video Motion will allow your camera to use the motion detection
feature. You may draw a finite motion area that will be used for monitoring.
Motion
Detection:
Sensitivity:
Detection
Areas:
Select this box to enable the motion detection feature of your
camera.
Specifies the measurable difference between two sequential
images that would indicate motion. Please enter a value
between 0 and 100.
Use your
mouse to click on the blocks that you would like to
monitor for motion.
Page 25 / 57
25
D-Link DCS-930 User Manual
Section 3 - Configuration
Setup > Mail
Email Account
SMTP Server
Address:
Sender e-mail
Address:
Receiver e-mail
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail
server.
This is the e-mail address of the person sending the camera
snapshots.
This is the e-mail address of the recipient.
If the SMTP server uses authentication, you must enter your user
name here.
This is the password that corresponds to your user name to
connect to the SMTP server.
This section allows you to configure the email notification settings for your
camera.
19216811.live