11

D-Link DCS-930 User Manual

Section 2 - Installation

Insert the Installation CD-ROM into your computer’s optical drive to start the autorun program.

The CD-ROM will open the Camera Installation Wizard. Simply click

Start

to go through the Installation Wizard, which will guide you

through the installation process from connecting your hardware to configuring your camera.

Starting the Camera Installation Wizard

12

D-Link DCS-930 User Manual

Section 2 - Installation

Alternatively, you may create a WPS connect using the WPS Button on the back

of the camera.

To create a WPS connection:

Step 1

Press and hold the WPS button on the side of the camera for three seconds.

The blue WPS

status LED above the button will blink.

Step 2

Press the WPS button on your router within 60 seconds. The WPS button is

usually on the front or side of your router. On some routers, you may need to log

in to the web interface and then click on an onscreen button to activate the WPS

feature. If you are not sure where the WPS button is on your router, please refer

to your router’s User Manual.

The DCS-930 will automatically create a wireless connection to your router.

While connecting, the green LED will flash and your camera will reboot.

WPS Button

WPS - Hardware Push Button Setup

13

D-Link DCS-930 User Manual

Section 3 - Configuration

Configuration

Using the Configuration Menu

After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is

designed to allow you to easily access and configure your DCS-930. At the end of the wizard, click

Go To Camera

, or enter the IP address

of your camera into a web browser, such as Internet Explorer

®

. To log in, use the User name

admin

and the password you created in the

Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click

OK

.

Note

: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is

192.168.0.20

.

14

D-Link DCS-930 User Manual

Section 3 - Configuration

Click the

ActiveX

or

Java radio button

to view live video.

Please make sure that you have the latest version of Java application installed on your computer to ensure proper

operation when viewing the video in Java mode. The Java application can be downloaded at no cost from Sun’s web site.

(http://www.java.com)

When you connect to the home page of your camera, you will be prompted to download ActiveX. If you want to use ActiveX to view your

video images instead of Java, then you must download ActiveX.

15

D-Link DCS-930 User Manual

Section 3 - Configuration

Live Video

ActiveX:

Java:

For Windows

®

Users that do not have Java installed, please choose this option

to view video streaming on the Home page.

For Windows

®

users that have Java installed, you can also use this for viewing

video. Mac users must choose this mode to view video.

Setup > Wizard

You may choose to configure your network by using the

Internet Connection Setup

Wizard

that includes step-by-step instructions. Otherwise, you may manually configure

your connection using the

Manual Internet Connection Setup

.