Page 11 / 98
Scroll up to view Page 6 - 10
11
Using the Setup Wizard
Follow the simple steps below to run the Setup Wizard to guide you quickly through
the installation process.
Click
Next
Insert the
D-Link DCS-900W
CD into
your CD-ROM drive.
Click
Install
Software
Click
Install
Wizard
Page 13 / 98
13
You must change the
Admin ID
and
Password
immediately to protect
your camera against unauthorized
access.
By default, the Admin ID and
Password are blank.
To change the
Admin ID and Password, select both
Change
boxes and enter a
New ID
and
New Password
.
Click
Next
Using the Setup Wizard
(continued)
Click
Wizard
to
begin
Your camera’s IP Address will be
displayed here if it is valid.
To run the Setup Wizard, click on
Start
->
Programs
->
DCS-900W Series Setup
Wizard
.
Page 14 / 98
14
Using the Setup Wizard
(continued)
Click
Next
The Connection Mode
depends on how your camera
is connected to your network.
Click Infrastructure for use
with a router or Adhoc for a
peer-to-peer connection. The
Network Name, Wireless
Channel, and Encryption Keys
MUST correspond with your
wireless network settings for
the camera to work.
The
IP Address, Subnet Mask
of your camera and
Gateway
must correspond with your
network settings for you to
access the camera.
If you are
unsure of what these settings
should be, please check with
your network administrator.
Click
Next
Page 15 / 98
15
Using the Setup Wizard
(continued)
Click
Link
Your setup is now
complete!
Click
Link
to
launch your Web browser
and view your images.
If you need to make any
changes, click
Back
to modify
your camera settings.
Otherwise, click
Restart
to
save and apply your settings.
19216811.live