Page 56 / 98
Scroll up to view Page 51 - 55
56
Once you have completed the initial configuration of the DCS-900W using the Web-
based interface, you can review or change your configuration using either the Web-
based configuration utility or the Property Settings in the DCS-900W IPView Lite.
To access the Property Settings menu, select
Camera
>
Property
from the main menu
.
A dialog box will appear which allows for Web Configuration settings and upgrading
firmware. The
Camera Property
dialog box will appear.
Select the desired options from
the tab selections to configure the camera.
General
Allows settings for the camera name, location and administrator information such as
administrator ID and password.
Please refer to the DCS-900W Configuration section
under
Advanced – System
on
P.19 for further details.
Camera Property Settings > General
IPView Lite
(continued)
Page 57 / 98
57
IP Assignment
If you need to change your IP Address, select the IP Address tab in the Camera
property window. There are two options:
Manually Assign
or
Assign Automatically
Using
.
Please refer to theDCS-900W Configuration section:
Advanced – System
on
P.19 for further details.
Camera Property Settings > IP Assignment
IPView Lite
(continued)
Page 58 / 98
58
DNS
DNS
(Domain Name System) server is an Internet service that translates domain names
into IP Addresses.
Please refer to the DCS-900W Configuration section under
Advanced
- System
on P.19 for further details.
Camera Property Settings > DNS
IPView Lite
(continued)
Page 59 / 98
59
Camera Property Settings > Wireless
Wireless
Your camera’s wireless settings must correspond to your network settings for a proper
and successful connection to the DCS-900W.
Please refer to the DCS-900W Configuration
section under
Advanced– System
on P.19 for further details.
IPView Lite
(continued)
Page 60 / 98
60
Camera Property Settings > Misc, Image
Image
Brightness, contrast, hue, resolution, compression, frame rate, and light frequency can
be adjusted for your camera.
Please refer to the DCS-900W Configuration section under
Advanced – Video
on P.33 for further details.
Misc
Configure the LED Control, ActiveX control location, and second port in this menu.
Please
refer to the DCS-900W Configuration
section under
Advanced– System
on P.19 for
further details.
IPView Lite
(continued)
19216811.live