1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-900W
    5. /
  5. 10
Page 46 / 98 Scroll up to view Page 41 - 45
46
List view format
IPView Lite allows you to manage your cameras by enabling you to search, configure
and preview all the DCS-900Ws from one location.
It is designed with a user-friendly interface for ease of control and navigation.
This section describes the operation of the IPView Lite application User Interface with
detailed procedures for using the application.
IPView Lite
IPView Lite
Page 47 / 98
47
To change the administrator
User Name
and
Password,
select
Tools > Options
. The
Options
dialog box will appear (see below).
Change Password
When IPView Lite is used for the first time, it is highly recommended that the Administrator
change the
User Name
and
Password
for security purposes. Once the
User Name
and
Password
are defined, only the Administrator has access to the management of
IPView Lite applications. This procedure should be done as soon as possible to prevent
unauthorized usage of the IPView
Lite application.
How to Change the Password
Enter a
User Name
and enter the
Password
twice. Once all the new details are
entered click
OK
.
IPView Lite
(continued)
Page 48 / 98
48
How to Change the IP Address
Changing the IP Address
To change an IP Address for a camera, select
Camera
>
Add.
An
Add Camera
dialog
box will appear
(see below)
.
Click on
Browse
. The
Browse Camera
dialog box will appear with a blank screen (see
below).
IPView Lite
(continued)
Page 49 / 98
49
How to Change the IP Address
Click
Search
.
IPView Lite will detect and search all the available cameras that are
installed on the local area network (example below.)
Highlight the camera you wish to change and click
Change IP
. If you have already
chnaged the administrator user ID and password, you will be prompted to enter your
admin ID and password before IPView Lite will allow you to change the IP Address for
the DCS-900W.
Enter the new
IP Address
, the
Subnet Mask
and the
Default gateway
into the respective
fields and click
OK.
IPView Lite will apply the new IP Address to the camera.
IPView Lite
(continued)
Page 50 / 98
50
Note:
Only cameras on your local area network can be located using Browse
in IPView Lite.
If you want to add a camera via the Internet, you must enter in
a physical IP Address. Remember that if your camera is behind a router, you
will need to enter your router’s WAN IP followed by a colon, then the port number
that is assigned to your camera, i.e. 10.10.10.80:800, where 10.10.10.80 is
your router’s WAN IP and :800 is the port that your camera is using.
Please
refer to the DCS-900W Configuration, Installation Behind a Router section of
this manual for details on P.27.
How to Add a Camera
To add a new camera select
Camera
>
Add
from the IPView Lite.
An
Add Camera
dialog box will appear. (See below.)
Enter the IP Address of the camera in the specified field and click
Add
. If the IP Address
is entered incorrectly or if you have a bad network connection, a dialog box will appear
to notify you of the error.
To add cameras in IPView Lite, check that you have your
network configured correctly. To add a remote camera, you need to have Internet access.
If you are unsure of the IP Address of the camera, you can click on
Browse to search
for cameras on your local area network
. The
Browse Camera
dialog box will appear
with a blank screen. (See below.
)
IPView Lite
(continued)

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top