D-Link DCS-6620 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 145 Scroll up to view Page 6 - 10

11

DCS-6620G User’s Manual

D-Link Systems, Inc.

Installation Wizard

Click

Install Wizard

Please wait while the InstallShield Wizard

prepares to install.

Click

12

DCS-6620G User’s Manual

D-Link Systems, Inc.

Installation Wizard

The InstallShield will install in the following folder.

To install into a different folder, click Browse and

select another folder.

Click

program icons to. You may type a new folder name,

or select one from the existing folders list.

Click

installed.

Page 13 / 145

13

DCS-6620G User’s Manual

D-Link Systems, Inc.

Installation Wizard

Installation is now complete.

IMPORTANT:

A hardware reset of the 802.11g PTZ Internet Camera may be required if the

Installation Wizard

cannot ﬁnd the camera. To accomplish this reset, lightly insert a paper clip (or a similar sized

tool) into the reset hole on the side of the camera (see page 132 for the location of the reset

hole). The LED on the front of the camera will begin blinking alternately. When it stops the

blinking cycle continue to hold in the reset button for about 10 seconds.

The opening Installation Wizard screen

will appear and

show a MAC address of

the

DCS-6620G

and an IP Address (which

may or may not be correct depending on

what you have your

DCS-6620G

connected

to

).

If you have a DHCP* server on your

network, there will be a valid IP Address

displayed here, indicated by a “Yes” under

the assigned column.

*A DHCP server is a device that supplies

IP Addresses to its clients that are on the

same network.

Click

Finish

.

To access the Installation Wizard screen, click on the

Installation Wizard Icon on your desktop.

Page 14 / 145

14

DCS-6620G User’s Manual

D-Link Systems, Inc.

Installation Wizard

The

Installation Wizard

will now show a MAC address for the

DCS-6620G

and an IP address.

This IP address may not be correct at this step in the installation until you see “Yes” under the

assigned column. The camera is now automatically conﬁgured with an IP address consistent

to the network it is connected to.

Click on the

Link to Selected

Devices

button.

Select the MAC address.

After you click on the

Link to Selected

Devices

button,

Installation Wizard

will automatically open your

Internet browser to the IP Address

of the

DCS-6620G

, in this example

it is: http://192.168.0.120.

Your

DCS-6620G

may have a

different IP Address.

For more information regarding the

functions of this screen, see the following

section titled “Installation Wizard Screen”

(page 15).

If a window appears asking to install a

Verisign certiﬁcate for authentication

Click

Yes

.This allows the proprietary

MPEG-4 video stream to be

recognized by Internet Explorer.

Page 15 / 145

15

DCS-6620G User’s Manual

D-Link Systems, Inc.

Installation Wizard Screen

The following options are available on the Installation Wizard screen by clicking on the

corresponding tab:

Search:

Click to search for any available

cameras to connect to the network.

Add:

Click to manually add a camera

to the network. A window will

appear, prompting you to enter the

camera’s IP address or domain

name. A second window will appear,

prompting you to enter the port

number.

Remove:

Click to remove the selected

camera(s) from the network.

Uncheck

All:

Click to uncheck all selected cameras.

Links to

Selected

Devices:

Click to view all selected devices on your Internet browser.

After you click “

Yes

” to the

Verisign

certiﬁcate for authentication,

you should see an image from

your

DCS-6620G

802.11g PTZ

Internet Camera.

You have now completed the Setup Wizard and are ready to use your camera! You can also continue

to the section titled “Installing IP surveillance Software” (page 22) to install the IP surveillance

software before you begin to use the DCS-6620G.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share