Page 96 / 145
Scroll up to view Page 91 - 95
96
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Back
Back to previous
layout.
Monitor Program
(continued)
Input/Output Control Tools
Digital Input/Digital
Output
Alert Message
Pan/Tilt control
To view an individual camera from the multi-camera layout, double-click on the desired display
window. You will see that the size of the display window is the same as the one-channel layout.
Clicking the “Back” button in the upper-left
corner of the video area will switch to the previous
selected multi-camera layout.
The position that each video channel is in for every layout will be saved for the next time the
layout is selected.
Page 97 / 145
97
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
IP surveillance includes pan/tilt control, DI/DO (Digital Input / Digital Output) control, and an
alert message receiver. Each of these are described in detail below.
DI/DO Control
Clicking on the “DI/DO” button shown below, you can switch to the DI/DO controls. The color
of the channel number indicates the status of the camera’s DI (Digital Input). You can click the
“Switch button” to change the HI/LOW state of the DO (Digital Output). With these features,
you can monitor the remote sensor input from DI and also trigger the camera by DO switch
.
Monitor Program
(continued)
Set digital output to LOW
Set digital output to HIGH
No connection
Refer to the following figure to use the pan and tilt controls.
Pan –
Pans the camera one full cycle.
Stop –
Stops movement of the camera during pan.
Patrol –
Enables the Auto Patrol feature.
Pull down menu –
Select a preset position to move the camera to.
Return to home position.
Tilt/navigate camera using arrows.
PTZ Control
When the color of a DI/DO number is gray, that means the video has not yet been connected
to a camera.
Page 98 / 145
98
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Monitor Program
(continued)
Alert Message
If you have checked the box for “Enable Motion Detect” or “Enable Digital Input” on “Camera
Configurations > Alert Settings“ screen, the alert message will show in the window shown
above. Once the alert, caused by motion detection or a digital input level changer, is triggered,
the alert message will be shown in this window. If there are more events than this window can
display, a scroll bar will appear.
The message format is described as follows:
“time”=>”alert type” #”channel number”(“win1”,”win2”,”win3”)
For example, the message “PM 02:41:00=>MO #1(0,1,1)” means that this is a motion detection
alert occurring at 02:41:00 PM in Motion Window 2 and Motion Window 3, for camera #1. If
the message “PM 02:41:56=>DI #1” is listed, that means there is an alert triggered by the DI,
for camera #1, at 02:41:56 PM .
Page 99 / 145
99
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
About
Miscellaneous Functions
Full Screen
Quit
Minimize
Stop Alert Sound
Configuration Menu
This section will describe some other miscellaneous functions of the icons shown above.
These functions are:
Quit
By clicking this button, IP surveillance will be closed with the latest settings
saved.
Minimize
Minimize the Monitor application.
Monitor Program
(continued)
By choosing “About”, located in the configuration menu shown below, a dialog box will appear
and display the information about the installed version of IP surveillance. The information
includes the software name, version, user name, and company.
Page 100 / 145
100
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Full Screen
With this function, you can enlarge the selected video channel to a full-screen
display. Press the “ESC” key on the keyboard or double-click the mouse on the
screen to return to a regular display.
Configuration Menu
The menu includes Camera Configuration, Global Settings, Scheduler, and
About options.
Common Control Functions
This section will describe the common control functions, shown above, which are depicted by
the small icons. These functions only apply to the currently selected channel. These functions
are:
Stop Record
Volume
Print
Trash can
Record
Snapshot
Volume Control
Click on this button to adjust your volume settings.
Monitor Program
(continued)
Stop Alert Sound
If an alert is triggered, the alert sound will start to play. After being informed of
the situation, you can press this button to stop the alert sound. It will also switch
the I\O Control to the Alert Message Receiver, so that the alert messages can
be reviewed.
19216811.live