Page 91 / 145
Scroll up to view Page 86 - 90
91
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Monitor Program
(continued)
If you do not want to monitor one video, you can drag and drop the video (in the video area)
to the trashcan in the common control area of the monitor program. The following section will
demonstrate the procedures for “drag and drop” step-by-step.
Show the video of a specified channel
This section depicts the method of how to show the video of a specific channel
in a display window.
Step 1:
Move the mouse cursor to the display window shown below
.
Video 1
5
9
13
Recording
Selected Channel
Connected and monitoring
Not configured channel
Configured but not
connected (no video)
Trashcan
Mouse cursor
Location hint
Display window
Page 92 / 145
92
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Monitor Program
(continued)
Step 2:
Press and hold the left mouse button, and then move the cursor to a display window in
the video area, which is shown below. Note that the cursor will change according to the area
in order to indicate whether the area is droppable or not.
Video 1
Droppable area
Not droppable area
Step 3:
Release the left mouse button while on top of a display window. In each display layout,
only one window can be assigned to a camera. Also, each camera must have its own separate
window when displayed. Once the video is in a display window, it can be dragged and dropped
to other windows. If you drag one camera’s video to a window that already has its own camera’s
video, the two cameras will trade display windows. Dragging and Dropping is a very convenient
way to manipulate the video channels in the IP surveillance Software.
Window
Window B
Page 93 / 145
93
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Monitor Program
(continued)
Video shown
Empty video box
Removing video from a display window
Step 1:
Move the mouse cursor to the display window that contains the video channel you
wish to remove.
Step 2:
Note that the cursor will change to the hand-shape when it has been moved onto the
displaying frame. After that, press the left mouse button and hold it.
Step 3:
Move the cursor, while still holding the left mouse button, to the trashcan in the common
area of the monitor program.
Step 4:
When the cursor shape changes to an arrow-shape over the trashcan, release the left
mouse button. The video in the corresponding display window will disappear. All operations
above are shown in the figure on the following page.
Page 94 / 145
94
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Press and hold the left
mouse button here.
Move the mouse cursor
here, and then release
the left mouse button.
The Layout
4 camera layout
9 camera layout
1 camera layout
6 camera layout
13 camera layout
16 camera layout
Monitor Program
(continued)
There are six different layouts available, as shown below, for the display windows in
the monitor program. You can select one of them by clicking on a layout icon. In each
layout, you can drag and drop the “channel number” to any display window in the
video area. Following the procedures described in the section titled “Show the video
of a specified channel”, you can add the video channels to display windows within the
selected layout one by one. You can also exchange the video between different display
windows by dragging and dropping.
Page 95 / 145
95
DCS-6620G User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
When you choose the one-camera layout or four-camera layout, the “Page up” and “Page
down” buttons will be shown in the left-bottom corner of the video area. You can use these
two buttons to switch the pages, as shown in the figure below.
Use to switch between
cameras.
Monitor Program
(continued)
Double click a display
window to switch to a
single channel layout.
19216811.live