1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DCS-5300W
    5. /
  5. 16
Page 76 / 109 Scroll up to view Page 71 - 75
76
If users have configured the
IP surveillance
software
and the
DCS-5300W
camera, the IP address and location will show the correct setting. Please note
that when users switch between cameras, the changing of the schedule will be
saved automatically.
The Schedule-Record-File operations
There are six related buttons. These buttons are illustrated on a prior page, as
section 9 in the Scheduling window:
Load:
This operation allows the users to load other schedules
from the schedule database for this camera.
Clear:
This operation will clear all the schedule markers in the
current editing area.
Save:
This button is for applying the changes for the current
schedule.
Save As:
To save the current schedule-record-file to another file
name.
Undo:
Undo the most recent changes.
Using IP surveillance Software (continued)
Close:
Click
Close
to close this window.
Page 77 / 109
77
Schedule with Time Picker
Remember to make the
Begin Time
earlier than the
End Time
. Otherwise the
Add
action will be ignored.
Select period
Once
Every Hour
Every Day
Every Week
Using IP surveillance Software (continued)
After you have made your
Begin Time
and
End Time
selections, select a
period. You may want to record only
Once
, or you may want to record
Every
hour
,
Every day
,
Every week
or
Every Month.
When you choose
Every Hour
, the recording scheduler will
be guided only by
the minutes setting.
Every hour
recording will occur during the minutes that
have been selected. (e.g., if the
Begin Time
was 2:20pm and the
End Time
was 7:40pm then the recording would be in effect from 20 minutes
past the
hour to 40 minutes past the hour for every hour of the day.)
Similarly, if you choose
Every day
then only the hour and the minute setting will
apply. If you choose
Every week
then only the day of the week, the hour and
the minute settings are valid. For
Every Month
, only the date (excluding the
month and year), the hour and the minute are valid settings.
Add
selected
period
schedule
Erase
selected
period
schedule
Page 78 / 109
78
Playback Program
The
Playback
program is a powerful tool to assist you in browsing the recorded
video database. It has two display modes (Normal display mode, Preview Mode)
and three playback methods (Full Range, Time Period, Events Preview). The
main tools it provides include:
Powerful play control tool:
•
Play
•
Stop
•
Pause
•
Fast play (from x1 to x16)
•
Slow play (from /1 to /16)
Convenient display adjustment tool:
•
Zoom in
•
Zoom out
•
Full screen
Flexible searching range adjustment tool:
•
User input (from full range to 1 second)
•
Zoom in (from full range to 10 seconds)
•
Zoom out (up to full range)
•
Page searching
•
Full range
Various exporting tools:
•
AVI file transducer
•
BMP file snapshot
•
Output to printer directly
Using IP surveillance Software (continued)
Page 79 / 109
79
The main window will be shown on the top of the screen and the display resolution
will change to 1024x768 automatically. There are four main areas in the window:
Display area
,
Histogram
area
,
Control area
, and
Status area
. There are
also three controls the
Area selection indicator
, the
Frame selection
indicator
, and the
Pull bar
. Explanations of the main Playback screen follow:
Logging-in
Before you start the
Playback
software program, it is necessary to login.
For
security reasons, only the administrator account can login to
Playback
. To
change the password of the admin account refer to the section of this manual
titled
Logging-In
located in the main section
Using IP surveillance
software.
After completing the installation of IP s
urveillance
, you can run the
Playback
program from:
Start\Program Files\D-Link\IP surveillance\Playback
or the directory you specified during the installation.
Playback Program (continued)
Using IP surveillance Software (continued)
Installation of the
IP surveillance
software is detailed in an earlier section
of this manual titled
Installation of IP surveillance Software
under the
main section titled
Software Installation
.
Display Area
Control
Area
Pull Bar
Area
Area Selection Indicator
Status Area
Histogram Area
Page 80 / 109
80
Display Area
The display area shows the surveillance database of each camera by events
triggered by an alert or by time. You can change the video size through the
Display Adjustment Tool
, and the playback method through the
Play Control
Tool
. Under the normal display mode you can double click on the frame area to
change the frame size to a 1:1 or 2.25:1 ratio. In the Preview mode, double
clicking on any frame area can change the display mode to normal and show a
10-second interval including the event you selected.
Histogram Area
The histogram is an interactive control. Not only can you get the event’s location
in terms of time, but
you can select a group of events or period from the event
histogram area and show it on the display area.
Control Area
The control area contains almost all the control selectors and toolboxes you
need to browse the database (except the page control). The
Page Control
Tool
is located on the right-bottom corner of the display area when the program
is operating in the preview mode. These control tools include location selector,
period selector, playback method selector, jog dial, display adjustment tool,
exporting tool, and system control tool.
Status Area
The
Status Area
is located at the bottom of the main window. It tells you
about
the program status including display mode, display size, display speed, exporting
file format, and exporting file name.
Area Selection Indicator
In the main
Playback
screen as shown above the display area has been
highlighted with a yellow rectangle. This rectangle is the area selection indicator.
This indicator can be set to either
Display Area
or
Histogram Area
, by moving
your mouse cursor to the Area you want to select. When you select the
Display
Area,
the
Display Adjustment Tool
will appear in the control area, and if you
select the
Histogram Area
, the
Display Adjustment Tool
will disappear and
the
Searching Range Adjustment Tool
will be shown in the control area.
Playback Program (continued)
Using IP surveillance Software (continued)

Rate

4 / 5 based on 1 vote.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top