D-Link DCS-5300G Router Manual PDF (Setup & Configuration Guide)

Page 56 / 145 Scroll up to view Page 51 - 55

56

Guest account:

This option allows a user to connect to a camera with

view-only privileges.

User name is

demo

. No password

is required.

This is useful for demonstrations and keeps

guests separate from users with accounts.

Configuration > Tools > System

Click on the

System

button to access the System

settings from the

Tools

menu.

Camera name -

Using the DCS-5300G with an Internet

browser (continued)

Check this option to shut off the LED at the base of the

camera. This will prevent anyone from observing the

operation of the Internet Camera.

The text will display as the title of the window within the

Windows operating system. This name will also display

on the log-in screen (once a password has been set).

Illegal characters (*,#,/) are not allowed and may render

the recording feature in IP surveillance (page 68) useless

for that camera.

Turn off the LED

indicator

-

Configuration > Tools > Admin (continued)

Click

System

Camera Name

Page 57 / 145

57

Configuration > Tools > System

Manual

-

Adjust the date and time according to what is

entered by the administrator. Notice the format in

the related field while typing.

Automatic

-

Synchronize with the NTP server over the Internet

whenever the

DCS-5300G

starts up. It will fail if

the assigned time server cannot be reached.

NTP server -

Assign the IP address or domain name of the

time server. Leaving the text box blank will let the

DCS-5300G

connect to default time servers.

Time zone

-

Used to adjust the hour of time servers for local

settings.

Keep current date and

time -

Using the DCS-5300G with an Internet

browser (continued)

Click to save the current date and time of

DCS-5300G

. An internal real-time clock maintains

the date and time even when the power is off.

Sync with computer time-

Click

Apply

to make

changes effective

Synchronize the date and time of

DCS-5300G

with the local computer. The date and time of the

PC is displayed and updated in the

DCS-5300G

.

Page 58 / 145

58

Configuration > Tools > Applications

Using the DCS-5300G with an Internet

browser (continued)

Click on the

Applications

button to access the Applications

settings from the

Tools

menu.

Page 59 / 145

59

Configuration > Tools > Applications (Continued)

Weekly schedule:

Sunday through Saturday -

Select the weekdays that should perform the

following operations:

Snapshots begin at

-

Snapshots stop at

-

Sets the time to stop the operations.

All of the time except for

the above schedule -

If you do not wish to set a schedule, this box must

be checked.

Using the DCS-5300G with an Internet

browser (continued)

Set the time to start operations. Setting the

begin

time the same as the

stop

time will

force the operations to run continuously.

Delay second(s) before

detecting next event -

Sets the time delay before restarting to check the

trigger condition when the current condition is

triggered.

Take snapshots at

second(s) after event -

After a snapshot is taken because of a trigger,

another snapshot will be taken after the

configured time in seconds.

Trigger condition -

There are 4 conditions related to the digital input

and three windows for motion detection. There

can be multiple selections. Select the appropriate

digital input condition according to the

characteristics of the external device.

High

or

low

indicate external voltage input for level trigger,

while

rising

or

falling

is for edge triggers. There

are three windows shown for the names you

defined for

motion detection.

Undefined

will

show instead of the window title if motion

detection is not setup yet. An active, named

motion window must be checked for motion

detection to be possible.

Reset output -

Check and save this option to reset the external

device at the digital output back to the original

state.

Event operation:

Page 60 / 145

60

Configuration > Tools > Applications (Continued)

Trigger action -

There are four options for two actions regarding

either trigger condition. They can have multiple

selections. While choosing the trigger output

alarm, the digital output will short both pins to

connect the circuit of the attached external

device; otherwise both pins will be open. While

choosing to upload snapshots, the method can

be either email or FTP. The snapshot names will

be

“videopre.jpg”,

videotrg.jpg”,

and

“videopos.jpg” respectively for the snapshots

before event, right upon event, and after event.

The date and time suffix may be added according

to the option. Confirm the external mail or FTP

server settings in network configuration.

Sequential operation

Using the DCS-5300G with an Internet

browser (continued)

Snapshot every

The camera

will send snapshots at the specified

interval to the external server according to the

chosen method. Remember this operation is

dependent to the weekly schedule.

Send snapshots by email -

Any upload action specified in the options above

will use the method chosen here. The captured

snapshot named “video.jpg” will be attached in

the email with subject “Periodic snapshots.”

Send snapshots by FTP -

The captured snapshots will upload to the

external FTP server with the file name depending

on the next option.

second(s) -

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share