Page 16 / 72
Scroll up to view Page 11 - 15
15
D-Link DCS-5300 User Manual
The upgrade window allows users to upload a saved firmware file. If the firmware
is older than that currently on the camera, a screen will appear indicating so and
prompting the user to confirm the upload.
This displays information about the firmware and plugin currently installed on the
camera.
Indicate the location of the firmware to be uploaded to the camera.
This displays the file name of the firmware selected for upload.
Click the
Reset to Default
tab to reset the camera’s settings to factory defaults.
Click
About
to display the
current version and date.
Click the
Exit
tab to exit the Installation Wizard screen.
Upgrade:
Package
Information:
Locate the
Firmware to
Upgrade:
Selected
Package
:
Reset to Default:
About:
Exit:
Page 17 / 72
16
D-Link DCS-5300 User Manual
UPnP
™
is short for Universal Plug and Play, which is a networking architecture that provides compatibility among
networking equipment, software, and peripherals. The DCS-5300
is a UPnP
™
enabled Network Camera. If your operating
system is UPnP
™
enabled, the device will be easier to configure. If you do not want to use the UPnP
™
functionality, it
can be disabled by unselecting “
Enabled
” on the DDNS/UPnP
™
settings page under “Advanced” in the configuration
menu. Use the following steps to enable UPnP
™
(Universal Plug and Play) settings only if you are running Windows
®
XP/Me. If you are running Windows 98/2000, UPnP
™
is not available.
Go to
Start > Settings
.
Enabling UPnP
™
for Windows
®
XP
Click
Control Panel
Click
Add or Remove Programs
Page 18 / 72
17
D-Link DCS-5300 User Manual
The following screen will appear:
Click
Add/Remove Windows Components
Click
Add/Remove Windows Components
Click
Details
Click
Universal Plug and Play
Click
OK
Page 19 / 72
18
D-Link DCS-5300 User Manual
Please wait while Setup configures the components.
Click
Next
Click
Finish
Page 20 / 72
19
D-Link DCS-5300 User Manual
The last three digits (146), represent the fourth octet of your Network Camera’s
IP address
(in this example, 198.168.0.146).
DCS-5300-146
To view your DCS-5300 Network Camera in an Internet browser, go to your
Desktop and click
My Network Places
.
Click
My Network Places
After you click on the
DCS-5300-146
icon, your Internet browser will
automatically be opened to the IP Address of the DCS-5300, in this example it
may have a different IP Address.
19216811.live