51
D-Link DCS-5300 User Manual
There are 4 conditions related to the digital input and three windows for motion detection. There can be multiple selections.
Select the appropriate digital input condition according to the characteristics of the external device. “High”, “low” indicate
external voltage input for level trigger, while “rising”, “falling” is for edge triggers. There are three windows shown for the
names you defined for
motion detection. “Undefined” will show instead of the window title if motion detection is not setup
yet. An active, named motion window must be checked for motion detection to be possible.
Check and save this option to reset the external device at the digital output back to the original state.
There are four options for two actions regarding
either trigger condition. They can have multiple selections. While
choosing the trigger output alarm, the digital output will short both pins to connect the circuit of the attached external
device; otherwise both pins will be open. While choosing to upload snapshots, the method can be either email or FTP.
The snapshot names will be “videopre.jpg”, videotrg.jpg”, and “videopos.jpg” respectively for the snapshots before event,
right upon event, and after event. The date and time suffix may be added according to the option. Confirm the external
mail or FTP server settings in network configuration.
Trigger condition:
Reset output:
Trigger action:
Sequential Operation
The DCS-5300 will send snapshots at the specified interval to the external server according to the chosen method.
Remember this operation is dependent to the weekly schedule.
Any upload action specified in the options above will use the method chosen here. The captured snapshot named “video.
jpg” will be attached in the email with subject “Periodic snapshots.”
The captured snapshots will upload to the external FTP server with the file name depending on the next option. It can be
used to refresh the captured image stored in the external web server to build creative homepages.
Snapshot every
second(s):
Send snapshots
by email:
Send snapshots
by FTP:
19216811.live