Page 16 / 24
Scroll up to view Page 11 - 15
1²
D-Link DCS-3415 Quick Install Guide
D-ViewCam Installation
Click
Finish
to complete the
installation.
Click
Finish
Page 17 / 24
1³
D-Link DCS-3415 Quick Install Guide
Adding a Camera
To start D-ViewCam, click on
Start
>
All Programs
>
D-Link
>
D-Link D-ViewCam
.
Use
admin
as the default user name and leave the password blank.
Click the
(Check Box) to continue.
Add a Camera
The D-ViewCam screen will appear as shown below. Click
(Next) to begin the
Add Camera wizard
.
Click
Click
Page 18 / 24
18
D-Link DCS-3415 Quick Install Guide
Adding a Camera
Choose either to add camera(s) by automatically searching for
camera(s) or to add camera(s) manually.
If you choose
Add Manually
, you will need to enter the IP address
of the camera. Click
Next
to continue.
If you select
Auto Discovery
, the system will search all available
cameras that are located in the same subnet within the same LAN.
The system will place all found cameras under the default map
called
My Map
. Click
Next
to continue.
Page 19 / 24
1´
D-Link DCS-3415 Quick Install Guide
Adding a Camera
D-ViewCam shows the detected IP camera(s) information. You can
choose and schedule the recording for each camera(s).
•
24/7 Continuous Recording:
Continuously record 24 hours
a day, 7 days a week.
•
24/7 Motion Detection Recording:
Continuously monitor,
but ONLY record when motion is detected.
•
Office Hours Only:
Continuously monitor during office hours
(08:00 AM to 06.00 PM), and ONLY record when motion is
detected.
•
Non-Office Hours Only:
Continuously monitor during non-office
hours (06:00 PM to 08.00 AM), and ONLY record when motion
is detected.
Note:
Excluding 24/7 Continuous Recording, other schedule recording
types can ONLY do recording when motion is detected. Please refer
to the user manual for more information.
Page 20 / 24
±0
D-Link DCS-3415 Quick Install Guide
D-ViewCam Installation
Your D-ViewCam Installation is Complete!
Select
Yes
to add another camera, or select
No
to continue.
Note:
After you have finished adding your camera(s), click
Close
to
view your camera(s).
19216811.live