Page 6 / 24
Scroll up to view Page 1 - 5
²
D-Link DCS-3415 Quick Install Guide
Hardware Installation
The package comes with a camera stand with a swivel ball screw
head that can be attached to the Network Camera’s bottom socket
cavity. Attach the camera stand to the Network Camera and place
it for your application. There are holes located in the base of the
camera stand allowing the camera to be mounted to the ceiling or
any wall securely.
Page 7 / 24
³
D-Link DCS-3415 Quick Install Guide
Software Installation
Turn on the computer and insert the D-Link DCS-3415 CD into the
CD-ROM drive. The following step-by-step instructions displayed are
shown when using Windows Vista
®
operating system. The steps and
screens are similar when using other Windows
®
operating systems.
Software Installation
Click
Next
to continue.
Click
I Agree
to accept the License
Agreement.
Click
Next
Click
I Agree
Click
Installation Wizard
Page 8 / 24
8
D-Link DCS-3415 Quick Install Guide
Software Installation
Click
Finish
to complete the
installation.
To start the installation click
Install
.
Note:
The installation may take
several minutes to complete.
Click
Install
Click
Finish
Page 9 / 24
´
D-Link DCS-3415 Quick Install Guide
Configuration
Configuring Your Camera with
the Installation Wizard
Click on the D-Link Installation Wizard icon that was created in your
Windows Start menu.
The Installation Wizard will appear and show the MAC address of your
DCS-3415 and an IP Address (which may or may not be correct
depending on what you have your DCS-3415 connected to). If you
have a DHCP server on your network, there will be a valid IP Address
displayed here.
Note:
A DHCP server is a device such as a router that automatically
issues IP settings.
Click
Manual Setup
Enter the admin ID and password.
Note:
The default Admin ID is
admin
with the password left blank.
Click
Next
Page 10 / 24
10
D-Link DCS-3415 Quick Install Guide
Configuration
A new window will pop up to ask if
you want to setup a PPPoE for the
device. Click
No
for quick setup.
For further information refer to the
manual for details.
Check the
Get IP by DHCP Server
Automatically
box to obtain a new
IP address every time the camera
starts up. Click
Next
to continue.
Select
UPnP Port Forwarding
if
your router supports this function.
If not, choose
Manual
to manually
enter your port numbers. Click
Next
to continue.
Click
Next
Click
Next
19216811.live