Page 46 / 67
Scroll up to view Page 41 - 45
46
D-Link DCS-3410 User Manual
Section 4 - D-ViewCam Installation
Click
Next
to start the installation.
Note:
The D-ViewCam installation process may take several minutes to
complete.
Click
Next
Click
Finish
to complete the installation.
Click
Finish
Page 47 / 67
47
D-Link DCS-3410 User Manual
Section 4 - D-ViewCam Installation
Add a Camera
To start D-ViewCam, select
Start
>
All Programs
>
D-Link
>
D-Link
D-ViewCam
.
Enter
Admin
as the default user name and leave the password blank.
Click
/ OK to log into the system and access the Add Camera
Wizard.
Note:
Please refer to page 51 in the D-ViewCam user manual
to change your password.
This section will show you how to start and add a camera to the D-ViewCam system.
Page 48 / 67
48
D-Link DCS-3410 User Manual
Section 4 - D-ViewCam Installation
Welcome to the Add Camera Wizard. Use this wizard to add your cameras to the D-ViewCam system.
Note:
Use the left or right arrow to navigate the wizard.
Click
/
Next
to continue.
Click
Next
Page 49 / 67
49
D-Link DCS-3410 User Manual
Section 4 - D-ViewCam Installation
Choose which method to add your camera(s). You can choose
Auto Discovery
to automatically search for your camera(s), or choose
Add Manually
to add your
camera(s) via the camera’s IP address. Click
Next
to continue.
If you choose
Auto Discovery
, the system will search all available cameras that are
located on the same LAN with same subnet. The system will place all the cameras
under the default map called My Map. Click
Next
to continue.
If you choose
Add Manually
, you will need to enter the IP address of the camera(s).
Click
Next
to continue.
Page 50 / 67
50
D-Link DCS-3410 User Manual
Section 4 - D-ViewCam Installation
D-ViewCam shows the detected IP camera(s) information. You can choose and schedule the recording for each camera.
• 24/7 Continuous Recording
: Continuously recording ±4 hours a day, 7 days a week.
• 24/7 Motion Detection Recording
: Continuously monitoring but ONLY recording when motion is detected.
• Office Hours Only
: Continuously monitoring during office hours (08:00 AM to 06.00 PM) and ONLY recording when motion
is detected.
• Non-Office Hours Only
: Continuously monitoring during non-office hours (06:00 PM to 08.00 AM) and ONLY recording when
motion is detected.
Note:
Excluding 24/7 Continuous Recording, other schedule recording types can ONLY do recording when motion is
detected. Please refer to page 32 for more information.
Click
Next
to continue.
19216811.live