D-Link DCS-3220 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 141 Scroll up to view Page 6 - 10

11

The InstallShield will install in

the following folder. To install

into a different folder, click

Browse and select another

folder.

Click

Select the Program folder

that Setup will add program

icons to. You may type a new

folder name, or select one

from the existing folders list.

Click

Please wait while the

Installation

Wizard

is

installed.

Installation Wizard (continued)

Page 12 / 141

12

Installation is now complete.

Installation Wizard (continued)

IMPORTANT:

A hardware reset of the Internet Camera may be required if the

Installation

Wizard

cannot find the camera. To accomplish this reset, lightly insert a paper

clip (or a similar sized tool) into the reset hole on the back of the camera (see

page 6 for the location of the reset

hole). The LED on the front of the camera

will begin blinking orange. When it stops the blinking cycle continue to hold in

the reset button until a second cycle of blinking red and green lights indicates a

second reset cycle has completed. This will take approximately 5-7 seconds.

The opening Installation Wizard screen

will appear and

show a MAC address of

the

DCS-3220

and an IP Address (which

may or may not be correct depending on

what you have your

DCS-3220

connected

to). If you have a DHCP* server on your

network, there will be a valid IP Address

displayed here, indicated by a “Yes”

under the assigned column.

*A DHCP server is a device that supplies

IP Addresses to its clients that are on the

same network.

Click

Finish

.

To access the Installation Wizard

screen, click on the Installation

Wizard Icon on your desktop.

Page 13 / 141

13

The

Installation Wizard

will now show a MAC address for the

DCS-3220

and

an IP address. This IP address may not be correct at this step in the installation

until you see “Yes” under the assigned column. The camera is now automatically

configured with an IP address consistent to the device it is connected to.

Click on the

Link to Selected

Devices

button.

Select the MAC address.

After you click on the

Link

to Selected Devices

button,

Installation

Wizard

will automatically

open

your

Internet

browser

to

the

IP

Address of the

DCS-

3220

, in this example it is:

http://192.168.0.12. Your

DCS-3220

may have a

different IP Address.

You have now completed the Setup Wizard and are ready to use your

camera! You can also continue to the section titled “Installing IP

surveillance Software” (P. 21) to install the IP surveillance software be-

fore you begin to use the DCS-3220.

For more information regarding the functions of this screen, see the following

section titled “Installation Wizard Screen.”

Installation Wizard (continued)

Page 14 / 141

14

Installation Wizard Screen

The following options are available on the Installation Wizard screen by clicking

on the corresponding tab:

Search -

Click to search for any available

cameras to connect to the network.

Add -

Click to manually add a camera to

the network. A window will appear,

prompting you to enter the camera’s

IP address or domain name. A

second window will appear,

prompting you to enter the port

number.

Remove -

Click to remove the selected camera(s) from the network.

Uncheck All -

Click to uncheck all selected cameras.

Links to Selected Devices -

Click to link all selected devices to the network.

Setup -

On the initial Setup Screen you can

configure System and Date/Time

settings for each camera. Click

for the camera.

System Settings -

Enter a Camera Name and create

a Root password for the camera.

Date/Time Settings -

Enter the Date and Time for each

camera. These settings can also be

configured on the

Tools > System

screen (page 51) when configuring

the camera via a Web browser.

Page 15 / 141

15

Installation Wizard Screen (continued)

Upgrade -

Network Settings -

Here users can configure the

Network Settings for the camera.

Enter the IP address, Subnet mask,

Default router IP, Primary DNS, and

Secondary DNS. Automatically, the

option to reset IP address at boot is

selected. If you would like to save

your IP address settings, make sure

to uncheck this box. These settings

can also be configured on the

Advanced > Network screen

(page 37) when configuring the

camera via a Web Browser.

Click Next and then

Apply

to save

the configured settings. Users can

click

or mistakes.

The upgrade window allows users

to upload a saved firmware file. If

the firmware is older than that

currently on the camera, a screen

will appear indicating so and

prompting the user to confirm the

upload.

Package Information -

This displays information about the

firmware and plugin currently

installed on the camera.

Rate

Popular D-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share