Page 21 / 138
Scroll up to view Page 16 - 20
21
DCS-2100 User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
Installation Wizard Screen
The following options are available on the Installation Wizard screen by clicking on the
corresponding tab:
Click to search for any available cameras to connect to the
network.
Click to manually add a camera to the network. A window will
appear, prompting you to enter the camera’s IP address or
domain name. A second window will appear, prompting you to
enter the port number.
Click to remove the selected camera(s) from the network.
Click to uncheck all selected cameras.
Click to link all selected devices to the network.
Search:
Add:
Remove:
Uncheck All:
Links to Selected
Devices:
Page 22 / 138
22
DCS-2100 User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
On the initial Setup Screen you can configure System and Date/Time settings for each
camera. Click
Next
to configure Network settings for the camera.
Enter a Camera Name and create a Root password for the
camera.
Enter the Date and Time for each camera. These settings can
also be configured on the
Tools > System
screen (page 58)
when configuring the camera via a Web browser.
System Settings:
Date/Time
Settings:
Setup
Page 23 / 138
23
DCS-2100 User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
Network Settings
Here users can configure the Network Settings for the camera. Enter the IP address,
Subnet mask, Default router IP, Primary DNS, and Secondary DNS. Automatically, the
option to reset IP address at boot selected. If you would like to save your IP address
settings, make sure to uncheck this box. These settings can also be configured on the
Advanced > Network screen
(page 46) when configuring the camera via a Web
Browser.
Click Next and then
Apply
to save the configured settings. Users can click
Previous
to
modify changes or mistakes.
Page 24 / 138
24
DCS-2100 User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
The upgrade window allows users to upload a saved firmware file. If the firmware is
older than that currently on the camera, a screen will appear indicating so and prompting
the user to confirm the upload.
Upgrade
Page 25 / 138
25
DCS-2100 User’s Manual
D-Link Systems, Inc.
Installation Wizard Screen
This displays information about the firmware and plugin
currently installed on the camera.
Indicate the location of the firmware to be uploaded to the
camera.
This displays the file name of the firmware selected for upload.
Package
Information:
Locate the
Firmware to
Upgrade:
Selected Package:
Click the Exit tab to exit the Installation Wizard screen.
Click About to display the
current version and date.
Click the Reset to Default tab to reset the camera’s settings to factory defaults.
Reset to Default
About
Exit
19216811.live