Page 56 / 85
Scroll up to view Page 51 - 55
56
D-Link DCS-1110 User Manual
Section 3 - Configuration
In View Mode format, click on the
Rotate
button
and the image should rotate 90
o
to the left (see image below).
Click the
View/List
button
. All the cameras and their properties, such as the camera name, IP Address, user name,
and functional information, will be displayed in the View/List screen
How to Rotate the View
View/List
Page 57 / 85
57
D-Link DCS-1110 User Manual
Section 3 - Configuration
Zoom
Click the
Zoom
button
to zoom in on the camera image. The options under zoom are Fit Window x1, x1.5, x2,
x2.5, x3, x3.5, and x4.
Color Setting
Click the
Color Setting
button
, to adjust the Brightness, Contrast, and Hue.
Wake Up Control Panel
Click the
Wake Up Control Panel
button
to open the control panel again when it is closed.
Always on Top
Click the
Always on Top
button
to have the display screen always appear on top.
Close
Click the
Close
button
to close the display screen of the camera.
Page 58 / 85
58
D-Link DCS-1110 User Manual
Section 3 - Configuration
To start recording with a camera, click the
Manual Recording
button
. An AVI file will appear in your IPView SE folder.
Note:
You must stop recording before changing any camera
settings.
In View Mode format select the
Snapshot
button
located on the
upper left corner of the screen. A Save Image dialog box will appear
for you to save the snapshot picture.
To stop recording with a camera, click the
Manual Recording
button
again.
How to take a Snap-Shot with the Camera
How to Start Recording
How to Stop Recording
Page 59 / 85
59
D-Link DCS-1110 User Manual
Section 3 - Configuration
Once you have completed the initial configuration of the DCS-1110 using the Web-based interface, you can review or
change your configuration using either the Web-based configuration utility or the Settings in the DCS-1110 IPView SE.
Configure Camera from Web
Click the
Configure Camera from Web
button
to start configuring your camera from the web again (see page
21).
Motion Setting
Click the
Motion Setting
button
to setup the options for motion recording. On this screen you can select to
Invoke Alarm
and/or
Send E-mail.
Click the
E-mail Setting
button to configure your E-mail. The
Sensitivity Level
can be adjusted between Low and High for motion recording.
Camera Settings
Page 60 / 85
60
D-Link DCS-1110 User Manual
Section 3 - Configuration
Manual Recording
Click the
Manual Recording
button
, to begin recording images from your camera.
Schedule Recording
Click the
Schedule Recording
button
to record based on a specific time and date. Click
Add
to set the time
and date for recording.
19216811.live