19216811.live²1
D-Link DAP-±590 User Manual
Section ² - Configuration
Multi-SSID
The device supports up to eight multiple Service Set Identifiers. You
can set the Primary SSID in the
Basic > Wireless
section. The SSID’s
factory default setting is
dlink
. The SSID can be easily changed to
The SSID can be easily changed to
connect to an existing wireless network or to establish a new wireless
network. When the information for the new SSID is finished, click the
Add
button. Click the
Save
button to let your changes take effect.
Check to enable support for multiple SSIDs.
Check to enable the priority feature.
This read-only value is the current band setting.
You can select up to seven multi-SSIDs. With the
Primary SSID, you have a total of eight multi-SSIDs.
Enable Multi-SSID:
Enable Priority:
Band:
Index:
SSID Visibility:
Enable
or
Disable
SSID visibility. Enabling this feature broadcasts the SSID across the network, thus making it visible to all
network users.
SSID:
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID’s factory default setting is
dlink
.
The SSID can
be easily changed to connect to an existing wireless
network.
The Multi-SSID security can be
Open System
,
WPA-Personal,
WPA-Enterprise
, or
802.1X
. For a detailed description of
the Open System parameters please go to page 23. For a detailed description of the WPA-Personal parameters please go to
page 24. For a detailed description of the WPA-Enterprise parameters please go to page 25. For a detailed description of the
802.1X parameters please go to page 26.
Security: