Page 46 / 90
Scroll up to view Page 41 - 45
³´
D-Link DAP-±590 User Manual
Section ² - Configuration
Filters > Wireless MAC ACL
Wireless Band:
Access Control List:
Displays the current wireless band rate.
Enter each MAC address that you wish to include
in your filter list, and click
Add
.
When a MAC address is entered, it appears in
this list. Highlight a MAC address and click the
Delete icon to remove it from this list.
Select
Disable
to disable the filters function.
Select
Accept
to accept only those devices with
MAC addresses in the Access Control List. All
other devices not on the list will be rejected.
Select
Reject
to reject the devices with MAC
addresses on the Access Control List. All other
devices not on the list will be accepted.
MAC Address List:
MAC Address:
The DAP-2590 features a wireless MAC Access Control List filter.
Once a user is finished with these settings, click the
Save
button to
let the changes take effect.
Current Client
Information:
This table displays information about all the current connected stations.
Page 47 / 90
³µ
D-Link DAP-±590 User Manual
Section ² - Configuration
Filters > WLAN Partition
Wireless Band:
Link Integrity:
Ethernet to
WLAN Access:
I
nternal Station
Connection:
Displays the current wireless band rate.
Select
Enable
or
Disable
.
If the Ethernet connection
between the LAN and the AP is disconnected, enabling
this feature will cause the wireless segment associated
with the AP to be disassociated from the AP.
The default is
Enable
. When disabled, all data from the
Ethernet to associated wireless devices will be blocked.
Wireless devices can still send data to the Ethernet.
The default value is
Enable
, which allows stations to
intercommunicate by connecting to a target AP. When
disabled, wireless stations cannot exchange data on the
same Multi-SSID. In �uest mode, wireless stations cannot
exchange data with any station on your network.
The DAP-2590 features a wireless partition. Once a user is finished with
these settings, click the
Save
button to let the changes take effect.
Page 48 / 90
³¶
D-Link DAP-±590 User Manual
Section ² - Configuration
Traffic Control > Uplink/Downlink Setting
The downlink bandwidth in Mbits per second.
The uplink bandwidth in Mbits per second.
Downlink
Bandwidth:
Uplink Bandwidth:
The uplink/downlink setting allows users to customize the downlink
and uplink interfaces including specifying downlink/uplink bandwidth
rates in Mbits per second. These values are also used in the QoS
and Traffic Manager windows. Once the desired uplink and downlink
settings are finished, click the
Save
button to let your changes take
effect.
Page 49 / 90
³9
D-Link DAP-±590 User Manual
Section ² - Configuration
Traffic Control > QoS
Check this box to allow QoS to prioritize traffic. Use the
drop-down menus to select the four levels of priority.
Click the
Save
button when you are finished.
Enable QoS:
Downlink
Bandwidth:
Uplink
Bandwidth:
Quality of Service (QoS) enhances the experience of using a network
by prioritizing the traffic of different applications. The DAP-2590
supports four priority levels. Once the desired QoS settings are
finished, click the
Save
button to let your changes take effect.
The downlink bandwidth in Mbits per second.
This value
is entered in the Uplink/Downlink Setting window.
The uplink bandwidth in Mbits per second.
This value
is entered in the Uplink/Downlink Setting window.
Page 50 / 90
50
D-Link DAP-±590 User Manual
Section ² - Configuration
Traffic Control > Traffic Manager
Use the drop-down menu to
Enable
the traffic
manager feature.
Traffic Manager:
The traffic manager feature allows users to create traffic management
rules that specify how to deal with listed client traffic and specify
downlink/uplink speed for new traffic manager rules. Click the
Save
button to let your changes take effect.
Toggle the radio buttons between Deny and Forward
to determine how to deal with unlisted client traffic.
The downlink bandwidth in Mbits per second. This
value is entered in the Uplink/Downlink Setting
window.
The uplink bandwidth in Mbits per second. This value
is entered in the Uplink/Downlink Setting window.
Unlisted Client
Traffic:
Downlink
Bandwidth:
Uplink Bandwidth:
19216811.live