¶1

D-Link DAP-±590 User Manual

Appendix A - Technical Specifications

Technical Specifications

Standards

• IEEE 802.11a

• IEEE 802.11b

• IEEE 802.11g

• IEEE 802.11n (draft)

• IEEE 802.3

• IEEE 802.3u

• IEEE 802.3ab

• IEEE 802.3af

Network Management

• Web Browser interface

HTTP

Secure HTTP (HTTPS)

• AP Array

• AP Manager II

• SNMP Support

D-View Module

Private MIB

• Command Line Interface

Telnet

Secure SSH Telnet

Data Rates*

For 802.11a:

• 54, 48, 36, 24, 18, 12, 9, and 6 Mbps

For 802.11b:

• 11, 5.5, 2, and 1 Mbps

For 802.11g:

• 54, 48, 36, 24, 18, 12, 9, and 6 Mbps

For 802.11n (draft): HT20/HT40

• 144.4/300, 130/270, 117/243, 104/216, 78/162, 66/135, 58.5/121.5, 52/108,

39/81, 26/54, 19.5/40.5, 12/27, and 6.5/13.5 Mbps

Security

• WPA™ Personal/Enterprise

• WPA2™ Personal/Enterprise

• WEP™ 64-/128-bit

• SSID Broadcast Disable

• MAC Address Access Control

±Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11a and

Draft 802.11n specifications. Actual data throughput will vary. Network conditions

and environmental factors, including volume of network traffic, building materials

and construction, and network overhead, lower actual data throughput rate.

Environmental conditions will adversely affect wireless signal range.

±±Please note that operating frequency ranges vary depending on the regulations

of individual countries and jurisdictions. The DAP-2590 isn’t supported in the

5.25~5.35 �Hz and 5.47 ~ 5.725 �Hz frequency ranges in some regions.

Wireless Frequency Range

• 2.4 to 2.4835 �Hz and 5.15 to 5.85 �Hz±±

±±

Operating Voltage

• 5V/2.5A or PoE

Radio and Modulation Type

For 802.11a/g/n:

BPSK, QPSK, 16QAM, and 64QAM with OFDM

For 802.11b:

DQPSK, DBPSK, DSSS, and CCK

Operating Frequency*

For 802.11a:

5.15 ~ 5.85 �Hz

For 802.11b/g:

2400 ~ 2483.5 MHz ISM band

For 802.11n:

2.4 �Hz Band: 2.4 ~ 2.4835 �Hz

5 �Hz Band: 5.15 ~ 5.85 �Hz

Dipole Antenna

4dBi �ain @2.4 �Hz

6dBi �ain @5 �Hz

¶±

D-Link DAP-±590 User Manual

Appendix A - Technical Specifications

LEDs

• Power

• LAN

• 2.4 �Hz

• 5 �Hz

Temperature

• Operating: 0˚C to 40˚C

• Storing: -20˚C to 65˚C

Humidity

• Operating: 10%~90% (non-condensing)

• Storing: 5%~95% (non-condensing)

Certifications

• FCC

• CE

• IC

• C-Tick

• UL

• WiFi

Dimensions

• L = 184.66 mm

• W = 164.59 mm

• H = 31.75 mm

±Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP-2590 isn’t supported in the 5.25~5.35

�Hz and 5.47 ~ 5.725 �Hz frequency ranges in some regions.

¶²

D-Link DAP-±590 User Manual

Appendix B - Technical Support

Contacting Technical Support

U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.

Before you contact technical support, please have the following ready:

• Model number of the product (e.g. DAP-2590)

• Hardware Revision (located on the label on the bottom of the Access Point (e.g. rev A1))

• Serial Number (s/n number located on the label on the bottom of the Access Point).

You can find software updates and user documentation on the D-Link website as well as frequently asked questions

and answers to technical issues.

For customers within the United States:

Phone Support:

(877) 354-6555

Internet Support:

For customers within Canada:

Phone Support:

(877) 354-6560

Internet Support:

¶³

D-Link DAP-±590 User Manual

Appendix C - Warranty

Warranty

Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:

• Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and

•

Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or

Protectorates, U.S. Military Installations, or addresses with an APO or FPO.

Limited Warranty:

D-Link warrants that the hardware portion of the D-Link product described below (“Hardware”) will be free from material defects in

workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below

(“Warranty Period”), except as otherwise stated herein.

• Hardware (excluding power supplies and fans): One (1) year

• Power supplies and fans: One (1) year

• Spare parts and spare kits: Ninety (90) days

The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-

Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the

actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement

hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part

thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects

to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety

(90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if

D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the

defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced

by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.

Limited Software Warranty:

D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications

for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90)

days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its

documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software

will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited

Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to

¶5

D-Link DAP-±590 User Manual

Appendix C - Warranty

D-Link’s functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software.

Except as otherwise agreed by DLink in writing, the replacement Software is provided only to the original licensee, and is subject to the

terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the

original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction,

or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original

licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof)

is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.

Non-Applicability of Warranty:

The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover

any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the

sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold

“As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything

stated herein to the contrary.

Submitting A Claim:

The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired

and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software

nonconformance in sufficient detail to allow DLink to confirm the same, along with proof of purchase of the product (such

as a copy of the dated purchase invoice for the product) if the product is not registered.

• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-354-6555, who will attempt to assist

the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must

obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID

Number at https://rma.dlink.com/.

• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping

package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside

of the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the defective

portion of the product and will not ship back any accessories.

• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products

sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer

and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible