1. Home
    2. /
  2. Manuals
    3. /
  3. D-Link
    4. /
  4. DAP-1555
    5. /
  5. 11
Page 51 / 97 Scroll up to view Page 46 - 50
51
D-Link DAP-1555 User Manual
Section ² - Configuration
The Wireless Setup Wizard is complete.
Click
Finish
to reboot the device.
If you choose
WPA2
, enter the WPA2 Personal Passphrase and
click
Next
to complete the Setup Wizard.
If you choose
WPA
, enter the WPA Personal Passphrase and click
Next
to complete the Setup Wizard.
Downloaded from
www.Manualslib.com
manuals search engine
Page 52 / 97
5±
D-Link DAP-1555 User Manual
Section ² - Configuration
Wireless Mode:
Site Survey:
Enable Wireless:
Wireless Network
Name:
Enable Auto
Channel Scan:
Wireless Channel:
802.11 Mode:
Select Infrastructure to connect to a wireless (AP) Access
Point, select Ad-hoc to connect to another bridge or wireless
station.
A function that looks for available wireless networks.
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions.
Service Set Identifier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The SSID
is case-sensitive.
The
Auto Channel Scan
setting can be selected to allow
the DAP-1555 to choose the channel with the least amount
of interference.
Indicates the channel setting for the DAP-1555. By default
the channel is set to 6. The Channel can be changed to fit
the channel setting for an existing wireless network or to
customize the wireless network. If you enable
Auto Channel
Scan
, this option will be greyed out.
If all of the wireless devices in your wireless network can connect in the same transmission mode, you can improve performance
slightly by choosing the appropriate “Only” mode. If you have some devices that use a different transmission mode, choose
the appropriate “Mixed” mode.
Mixed 802.11a and 802.11g
- Select this so the bridge can site survey to 802.11a and 802.11g networks.
Mixed 802.11a, 802.11g and 802.11b
- Select this so the bridge can site survey to 802.11a, 802.11g and 802.11b networks.
Mixed 802.11a, 802.11g and 802.11ng
- Select this so the bridge can site survey to 802.11a, 802.11g and 802.11ng networks.
802.11ng means it’s 802.11n operated in 2.4GHz band.
Mixed 802.11a, 802.11g, 802.11ng and 802.11b
- Select this so the bridge can site survey to 802.11a, 802.11g, 802.11ng
and 802.11b networks.
Mixed 802.11na, 802.11a, 802.11g
- Select this so the bridge can site survey to 802.11na, 802.11a and 802.11g networks.
802.11na means it’s 802.11n operated in 5GHz band.
Wireless
Downloaded from
www.Manualslib.com
manuals search engine
Page 53 / 97
5²
D-Link DAP-1555 User Manual
Section ² - Configuration
Transmission Rate:
Channel Width:
Security Mode:
Enable:
Mixed 802.11na, 802.11a, 802.11g and 802.11b
- Select this so the bridge can site survey to 802.11na, 802.11a, 802.11g,
and 802.11b networks.
Mixed 802.11na, 802.11a, 802.11ng and 802.11g
- Select this so the bridge can site survey to 802.11na, 802.11a, 802.11ng
and 802.11g networks.
Mixed 802.11na, 802.11a, 802.11ng, 802.11g and 802.11b
- Select this so the bridge can site survey to 802.11na, 802.11a,
802.11ng, 802.11g and 802.11b networks.
Select the transmit rate. It is strongly suggested to select
Best (Auto)
for best performance.
Select the Channel Width:
Auto 20/40
- Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz
- Select if you are not using any 802.11n wireless clients.
Refer to page 65 for more information regarding wireless security.
Enable the Wi-Fi Protected Setup feature.
Downloaded from
www.Manualslib.com
manuals search engine
Page 54 / 97
5³
D-Link DAP-1555 User Manual
Section ² - Configuration
IP Address Mode:
IP Address:
Subnet Mask:
Default Gateway:
Device Name:
Select Static if your ISP assigned you the IP
address, subnet mask, gateway, and DNS server
addresses. Select DHCP to automatically assign
an IP address to the computers on the LAN/private
network.
Enter the IP address assigned by your ISP.
Enter the Subnet Mask assigned by your ISP.
Enter the Gateway assigned by your ISP.
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
Network Settings
Static
Downloaded from
www.Manualslib.com
manuals search engine
Page 55 / 97
55
D-Link DAP-1555 User Manual
Section ² - Configuration
DHCP
Select DHCP to automatically obtain an IP address
on the LAN/private network.
Enter the Device Name of the AP and click
Next
to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
LAN Connection
Type:
Device Name:
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.7 / 5 based on 3 votes.

Popular D-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top