Page 11 / 79
Scroll up to view Page 6 - 10
DG-BR4015N User Manual
11
3. Connect 3G USB dongle to the USB port on the Router. Click ‘next’ to continue
with the installation.
4. Power ON the router. It will take approximately 30 seconds for router to boot
up completely. Ensure that all the LED’s on the router are ON. If not, try the
above steps again else click ‘next’ to continue with the installation.
Page 12 / 79
DG-BR4015N User Manual
12
5. Connect your desktop/notebook to one of the LAN ports (1~4) of the router.
Click ‘next’ to continue with the installation.
6. Enter the IP address of the router (default IP
192.168.2.1 will automatically
appear). Click ‘Login’ to continue with the installation.
Page 13 / 79
DG-BR4015N User Manual
13
7. Default Username is admin and Password is admin. Click ‘OK’ to continue
with the installation.
8. Below screen will display the Router Setup Wizard steps. Click ‘next’ to
continue with the installation.
Page 14 / 79
DG-BR4015N User Manual
14
9. Select the type of Internet connection you wish to set. Click ‘next’ to continue
with the installation.
i)
If “
Wan Interface Setup
” is set to
DHCP
then the following screen will appear.
Enter any Hostname, this field is optional. Click ‘
next
’ to continue with the
installation.
Page 15 / 79
DG-BR4015N User Manual
15
ii)
If “
Wan Interface Setup
” type is set to
Static IP
then following screen will appear.
Enter the IP address, Subnet Mask, Default Gateway and DNS address provided by
ISP in the screen shown below and click ‘
next
’ to continue with the installation.
iii) If “
Wan Interface Setup
” type is set to
PPPoE
then following page will appear.
Enter the PPPoE Username and Password as provided by ISP and click ‘
next
’ to
continue with the installation.
19216811.live