Page 36 / 79
Scroll up to view Page 31 - 35
DG-BR4015N User Manual
36
2-5 Internet Mode Setup (3G)
.
Configure Internet mode setup manually.
2-5-1 3G mode
If your ISP Internet mode is 3G, then configure the following parameters.
Parameter
Description
State
Enter state from pull-down menu. If not listed select Manual.
APN
Enter the APN (Access Point Name) provided by ISP.
Dial Number
Enter the dial number provided by your ISP.
Username
Enter Username if provided by your ISP. This field is optional.
Password
Enter Password if provided by your ISP. This field is optional.
PIN
Enter PIN if provided by your ISP. This field is optional.
Click Apply to continue with the installation.
Page 37 / 79
DG-BR4015N User Manual
37
2-5-2 Static (Fixed IP) mode
If your connection mode is static IP, then configure the following parameters.
Parameter
Description
IP address
Please input IP address assigned by your service provider.
Subnet Mask
Please input subnet mask assigned by your service provider
Default Gateway
Please input the default gateway assigned by your service provider.
Primary DNS Server
Please input the IP address of primary DNS server provided by
your service provider.
Secondary DNS
Server
Please input the IP address of secondary DNS server provided by
your service provider.
MAC Address
Some ISPs require end-user's MAC address to access their
network. Click “Fill my MAC”, register your PC's MAC address.
You can also manually input the MAC address.
Click Apply to continue with the installation.
Page 38 / 79
DG-BR4015N User Manual
38
2-5-3 DHCP Mode
This router to automatically obtain IP address from your ISP, in DHCP mode. If your ISP
does not provide any IP network parameters, select the connection and Input Hostname.
Click Apply to continue with the installation.
2-5-4 PPPoE Mode
If your ISP provides PPPoE connection, select the PPPoE option. And enter
the following parameters.
Page 39 / 79
DG-BR4015N User Manual
39
Parameter
Description
Username
Enter the username provided by ISP
Password
Enter the password provided by ISP
Verify Password
Re-enter password to verify
Operation Mode
°
Connect Keep Alive: Connect automatically to the Internet
after rebooting the system or connection failure.
°
Connect on Demand: In this mode, the Internet connection
can be terminated.
°
Connect Manual: Connect to the Internet by users
manually.
Click “Apply” to continue with the installation.
2-6 Operation Mode
Please click ‘Network menu on the left of web management interface, and the following
screen will be displayed on your web browser.
Here you can configure the operation mode which is suitable for your environment. The
default setting is Gateway. Router supports 2 operation modes.
±
Bridge
: All Ethernet and wireless interfaces are bridged into a single bridge
interface. When Bridge mode is applied, NAT gets disabled.
Page 40 / 79
DG-BR4015N User Manual
40
±
Gateway
:
The first Ethernet port is treated as WAN port. The other Ethernet
ports and the wireless interface are bridged together and are treated as LAN ports.
Parameter
Description
NAT
NAT can be enabled or disabled as suitable for user environment.
TCP Timeout
The TCP timeout controls how long transmitted data may remain
unacknowledged
before
a
connection
is
forcefully
closed.
Increasing the user timeouts allows established TCP connections to
survive extended periods of disconnection.
UDP Timeout
The UDP timeout controls how long UDP data may remain
unacknowledged
before
a
connection
is
forcefully
closed.
Increasing the user timeouts allows established UDP connections
to survive extended periods of disconnection.
When you finish with all settings, please click ‘
Apply
’ button to continue with other
setup procedures.
19216811.live