Page 21 / 115
Scroll up to view Page 16 - 20
DG-BR4000N/E User Manual
21
Step 3
If you are not sure of the available SSID, please log in to the Web page of the
wireless router, and view the SSID in the
Wireless Basic Settings
page of the
wireless settings. For more information about the wireless settings, please refer to
section
5
-1 Wireless Basic Settings.
Note: After your wireless network card connects to the wireless router
successfully, you should set the network adapter to obtain an IP address
automatically. The configuration of wireless connection is now complete.
Page 22 / 115
DG-BR4000N/E User Manual
22
3. Software Installation
Insert the Setup CD into your CD-ROM drive of notebook/desktop computer.
Explore the CD and execute the “
Smart Wizard.exe
” file. Screen given below will be
displayed. Click ‘
Next
’ to continue.
Page 23 / 115
DG-BR4000N/E User Manual
23
Connect one end of a network cable to the WAN port of the router and the other end to
the DSL/Cable modem. Click ‘
Next
’ to continue.
Connect one end of the provided network cable to one of the LAN ports (1~4) of the
router and the other end to your computer. Click ‘
Next
’ to continue with the installation.
Page 24 / 115
DG-BR4000N/E User Manual
24
Power on the Router. It will take approximately 30 seconds for the router to boot up
completely. Ensure that all the LED’s on the router are ON. If not, try the above steps
again else click ‘
Next
’ to continue.
Enter the Router’s password to log in to the Router. The default password is “
1234
”. Click
‘Next’
to continue.
Page 25 / 115
DG-BR4000N/E User Manual
25
Dynamic IP (DHCP)
Verify the Internet Connection Type the wizard has detected. If it is not correct, please
configure it manually. Click ‘
Next
’ to continue.
Note: If you are not sure which Internet Connection Type you use, please
contact your Internet Service Provider for this information.
Note: The above mentioned steps are the common steps to be followed for
all the types of internet connection. The procedure to be followed after
these common steps for all the connection types have been explained
below.