Page 16 / 115 Scroll up to view Page 11 - 15
DG-BR4000N/E User Manual
16
Step 3
Double-click
Internet Protocol (TCP/IP)
and the
Internet Protocol (TCP/IP)
Properties
window appears.
Page 17 / 115
DG-BR4000N/E User Manual
17
Step 4
Select Use the following IP address and enter the IP address of the network
adapter. The IP address must be 192.168. 2. X (X is a number in the range of 2 to
254). If you want to access the Internet through a wireless router, you need to enter
the default gateway and IP address of the DNS server correctly.
Step 5
Set the subnet mask and click
OK
.
Page 18 / 115
DG-BR4000N/E User Manual
18
Step 6
Next, you can ping the default IP address of the wireless router, to check whether
the current connection between the PC and the wireless router is normal. Choose
Start > Run
from the desktop and enter ping 192.168.2.1.
Note: 192.168.2.1 in the ping command is the default IP address of the LAN
interface. If the IP address changes, enter the current IP address instead.
Step 7
If the PC can ping through the default IP address of the wireless router, the
following page appears, indicating that the connection between your PC and the
wireless router is normal.
Page 19 / 115
DG-BR4000N/E User Manual
19
2-4 Wireless Connection
By default, the AP function of the wireless router is enabled. If you use a wireless network
adapter, do as follows to establish the connection:
Step 1
Enable the wireless network adapter on your PC and ensure that the Wireless Zero
Configuration tool is available. Right-click the
Wireless Network Connection
icon
and choose
View Available Wireless Networks
from the menu.
Page 20 / 115
DG-BR4000N/E User Manual
20
Step 2
In the Wireless Network Connection page, click Refresh network list and the
network list is refreshed. The default SSID of the wireless router is DIGISOL.
Select the wireless router that you want to connect and click
Connect
. The default
wireless security mode is None, and you can connect the wireless router directly
without the encryption key in this mode. If the wireless router is encrypted, you
need to enter the correct key to connect to the wireless router.

Rate

4 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top