Page 21 / 103
Scroll up to view Page 16 - 20
DG-BG4300N User Manual
PSK key. For more information about wireless security, refer to the user manual.
Step 13
: Click ‘
Next’
and the following page appears. In this page, you can view the
configuration summary.
Step 14
: Click ‘
Finish
’ to save your settings and reboot the router.
Page 22 / 103
DG-BG4300N User Manual
4. Web Browser Configuration
The DSL device is an ADSL2+ wireless router. When you power on the device, the system will boot up
and connect to ADSL automatically. The system provides a PVC for bridge test by default. The default
configurations for the system are listed below.
LAN IP address:
192.168.1.1
, Netmask:
255.255.255.0
Default VPI/VCI for ATM (maximum 8 sets):
0/32, 1/32, 0/35
ADSL Line mode: Auto-detect.
User can change settings via WEB browser. The following sections describe the set up procedures.
Please set your PC’s Ethernet port
as follow:
IP address:
192.168.1.XXX
Netmask:
255.255.255.0
Page 23 / 103
DG-BG4300N User Manual
Access the Web Console:
Start your web browser.
Type the Ethernet IP address of the modem/router on the address bar of the browser. Default
Enter Password in the dialog box when it appears. Default Username:
admin
Password:
1234
Page 24 / 103
DG-BG4300N User Manual
Once you have connected to ADSL2+ router. You will see the status page.
This page displays the ADSL modem/router’s current status and settings. This information is
read-only
except for the PPPoE/PPPoA channel for which user can connect/disconnect the channel on demand.
Click the “Refresh” button to update the status
Function buttons in this page:
Connect / Disconnect
The two buttons take effect only when PVC is configured as PPPoE/PPPoA mode. Click
Connect/Disconnect button to connect/disconnect the PPP dial up link.
Page 25 / 103
DG-BG4300N User Manual
To view the ADSL Configuration Status please click on “ADSL”.
To view the ADSL Statistics please click on “Statistics”.
19216811.live