1. Home
    2. /
  2. Manuals
    3. /
  3. Digisol
    4. /
  4. DG-BG4100NU
    5. /
  5. 18
Page 86 / 134 Scroll up to view Page 81 - 85
DG-BG4100N User
Manual
86
Field
Description
Robust Count
The Robust Count allows tuning for expected packet loss
on a network. By default, the value is set to 2.
Last member
query count
This parameter indicates last member query interval. It is
the maximum response time in seconds for an IGMP host
in reply to group-specific queries.
By default, the value is set to 2
Query Interval
This parameter indicates the query interval. It is the interval
in seconds (s) between general queries sent by the
querier.. Default is 60 sec.
Query response
Interval
This parameter indicates the query response interval. It is
the maximum response time in seconds for an IGMP host
in reply to general queries. By default, the value is set to
100.
Group Leave
delay
The message is sent when a host leaves a group. Default
value is 2000.
Page 87 / 134
DG-BG4100N User
Manual
87
3.5.5
TR-069
TR-069 is a protocol for communication between a CPE and Auto-Configuration Server
(ACS).
Choose
Service > TR-069
, and the page shown in the following page appears. In this page,
you can configure the TR-069 CPE.
Page 88 / 134
DG-BG4100N User
Manual
88
The following table describes the parameters of this page:
Field
Description
ACS
URL
The URL of the auto-configuration server to connect
to.
User Name
The user name for logging in to the ACS.
Password
The password for logging in to the ACS.
Periodic Inform Enable
Select Enable to periodically connect to the ACS to
check whether the configuration updates.
Periodic Inform Interval
Specify the amount of time between connections to
ACS.
Connection Request
User Name
The connection username provided by TR-069
service.
Password
The connection password provided by TR-069
service.
Path
Identifies the PATH that the service should use.
Port
Identifies the port number that the service should
use.
Debug
ACS Certificates CPE
As vital data (like user names and passwords) may
be transmitted to CPE via TR-069 protocol it is
essential to provide secure transport channel and
always authenticate the CPE against the ACS.
Secure transport and authentication of the ACS
identity can easily be provided by usage of HTTPS
and verification of ACS certificate.
Show Message
Select Enable to display ACS SOAP messages on
the serial console.
CPE sends GetRPC
Select Enable, the router contacts the ACS to obtain
configuration updates.
Page 89 / 134
DG-BG4100N User
Manual
89
Skip MReboot
Specify whether to send an MReboot event code in
the inform message.
Delay
Specify whether to start the TR-069 program after a
short delay.
Auto-Execution
Specify whether to automatically start the TR-069
after the router is powered on.
3.5.6
ACL
Choose
Service > ACL
, the page shown in the following figure appears. In this page, you
can permit the data packets from LAN or WAN to access the router. You can configure the IP
address for Access Control List (ACL). If ACL is enabled, only the effective IP address in the
ACL can access the router.
Note:
If you select Enable in ACL capability, ensure that your host IP address is in
ACL list before it takes effect.
Page 90 / 134
DG-BG4100N User
Manual
90
The following table describes the parameters and buttons of this page:
Field
Description
Direction Select
Select the router interface. You can select LAN or WAN. In
this example, LAN is selected.
LAN ACL Switch
Select it to enable or disable ACL function.
IP Address
Enter the IP address of the specified interface. Only the IP
address that is in the same network segment with the IP
address of the specified interface can access the router.
Services Allowed
You can choose the following services from LAN: Web,
Telnet, SSH, FTP, TFTP, SNMP, or PING. You can also
choose all the services.
Add
After setting the parameters, click it to add an entry to the
Current ACL Table.
Reset
Click it to refresh this page.
Current ACL Table
Displays the services that are added and are active.

Rate

4.3 / 5 based on 4 votes.

Popular Digisol Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top