Page 16 / 75
Scroll up to view Page 11 - 15
Conceptronic C300BRS4
User Manual
16
Configuring Router Settings
This chapter describes how to configure the Wireless Broadband Router the first time you use it or if
you are configuring it after resetting the device to the factory default settings. The following
sections describe how to configure the router through the Web based configuration.
The configuration of your C300BRS4 is web based. You will need a web browser for the configuration
of the device.
Note:
For configuration of the router it is advised to use a LAN Cable connection to the device
instead of a Wireless connection.
A.
Start your web browser (like: Internet Explorer, FireFox or Safari).
B.
Enter the IP address of the device in the address bar of your web browser (By default:
).
The Login page of the C300BRS4 will be shown.
C.
Enter the Username and Password (Default: ‘
admin
’ & ‘
admin
’) and click “
Submit
” to enter
the configuration pages.
When the Username and Password are correct the router will display the “
Device Settings
”
overview.
The “
Device Settings
” overview shows all configured settings for the LAN, WAN and Wireless part of
the router.
C
C
Page 17 / 75
Conceptronic C300BRS4
User Manual
17
The “
Home
” menu of the configuration contains the following configuration options:
Wizard
,
Wireless
,
WAN
,
LAN
and
DHCP.
Device Settings Overview
Page 18 / 75
Conceptronic C300BRS4
User Manual
18
HOME - WIZARD
You can setup the C300BRS4 through the build-in Wizard. This Wizard will help you configuring the
basic settings of the C300BRS4 step by step.
To use the Setup Wizard, click the
Run Wizard
button.
Setup Wizard window
Note:
Before you begin with the Wizard Configuration, make sure you have all information for your
internet settings available. (For example: Account information, connection type, etc.)
A.
The welcome screen lists five steps of
the wizard. Click
“
Next”
to continue.
B.
You are recommended to set an
admin password here. Enter the new
password and re-enter it for
confirmation.
When completed, click
“
Next
”.
Page 19 / 75
Conceptronic C300BRS4
User Manual
19
C.
For system management purpose, a
correct time setting is critical to have
accurate time stamps on the system
logs.
Set an appropriate Time Zone in this
step.
When completed, click
“
Next
”.
D.
Select the Internet Connection
method which corresponds with your
provider settings.
If you don’t know which option you
need for your internet connection,
please check the documentation of
your
provider
or
contact
your
provider helpdesk.
When completed, click
“
Next
”.
E.
When your provider requires a Static
IP connection, select the “
Static IP
”
option.
Enter the requested information:
•
IP Address
•
Subnet Mask
•
ISP Gateway Address
•
Primary DNS
•
Secondary DNS (Optional)
When completed, click
“
Next
”.
Connection - Static IP
Page 20 / 75
Conceptronic C300BRS4
User Manual
20
F.
When your provider requires a
Dynamic IP connection, select the
“
Dynamic IP
” option.
Some providers require a specific
Hostname for their connections. If
your provider requires a specific
Hostname, enter the Host Name in
the field.
Some providers only allow 1 specific
MAC address to connect to the
internet. If your PC Network Card
works with the specific required MAC
address,
press
the
“
Clone
MAC
Address
” button or enter the MAC
Address manually.
When completed, click “
Next
”.
Connection – Dynamic IP
G.
When your provider requires a PPPoE
connection, select the “
PPPoE
”
option.
Enter the requested information:
•
User Name
•
Password
•
Retype Password
When completed, click “
Next
”.
Connection - PPPoE
19216811.live