Page 36 / 75 Scroll up to view Page 31 - 35
5.2.4 ADSL Statistics
The following figure shows the ADSL Network Statistics screen.
Within the ADSL
Statistics window, a bit Error Rate Test can be started using the ADSL BER Test
button.
The Reset button resets the statistics.
35
Page 37 / 75
Field
Description
Mode
Modulation protocol G.DMT or T1.413
Type
Channel type Interleave or Fast
Line Coding
Line Coding format, that can be selected G.dmt, G.lite,
T1.413, ADSL2, Annex L and Annex M
Status
Lists the status of the DSL link
Link Power State
Link output power state.
SNR Margin (dB)
Signal to Noise Ratio (SNR) margin
Attenuation (dB)
Estimate of average loop attenuation in the downstream
direction.
Output Power (dBm)
Total upstream output power
Attainable Rate (Kbps)
The sync rate you would obtain.
Rate (Kbps)
Current sync rate.
Super Frames
Total number of super frames
Super Frame Errors
Number of super frames received with errors
RS Words
Total number of Reed-Solomon code errors
RS Correctable Errors
Total Number of RS with correctable errors
RS Uncorrectable Errors Total Number of RS words with uncorrectable errors
HEC Errors
Total Number of Header Error Checksum errors
OCD Errors
Total Number of out-of-cell Delineation errors
LCD Errors
Total number of Loss of Cell Delineation
Total Cells
Total number of ATM cells (including idle and data cells).
Data Cells
Total number of ATM data cells.
Bit Errors
Total number of bit errors.
Total ES:
Total Number of Errored Seconds
Total SES:
Total Number of Severely Errored Seconds
Total UAS:
Total Number of Unavailable Seconds
36
Page 38 / 75
5.2.5 Route
Choose
Route
to display the routes that the route information has learned.
5.2.6 ARP
Click
ARP
to display the ARP information.
37
Page 39 / 75
5.2.7 DHCP
Click
DHCP
to display the DHCP information.
38
Page 40 / 75
Chapter 6
Advanced Setup
This chapter explains: WAN, LAN, Routing and DSL.
VPI/VCI
ATM VPI (0-255) / VCI (32-65535)
Con. ID
ID for WAN connection
Category
ATM service category, e.g. UBR, CBR…
Service
Name of the WAN connection
Interface
Name of the interface for WAN
Protocol
Shows bridge or router mode
IGMP
Shows enable or disable IGMP proxy
Firewall
Shows if the Firewall enabled or disabled
Nat
Shows if the Network Address Translation(NAT) is enabled
or disabled.
QoS
Shows enable or disable IGMP QoS
State
Shows enable or disable WAN connection
6.1 WAN
39

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top