Page 56 / 75
Scroll up to view Page 51 - 55
Click on the Dynamic DNS button. The following screen will be
displayed.
55
Page 57 / 75
D-DNS provider
Select a dynamic DNS provider from the list
Hostname
Enter the name for the dynamic DNS server.
Interface
Select the interface from the list
Username
Enter the username for the dynamic DNS server.
Password
Enter the password for the dynamic DNS server.
To add a dynamic DDNS, select your D-Dns provider. Then input
Hostname, Username and Password. Click Save/Apply. The following
screen will be displayed.
56
Page 58 / 75
6.7 DSL
To access the DSL settings, First click On
Advanced Setup
and then click on
DSL
.
The DSL Settings dialog box allows you to select an appropriate modulation mode.
Option
Description
G.dmt/G.lite
Sets G.Dmt/G.lite if you want the system to use either G.Dmt
or G.lite mode.
T1.413
Sets the T1.413 if you want the system to use only T1.413
mode.
ADSL2 Enabled
The device can support the functions of the ADSL2.
AnnexL Enabled
The device can support/enhance the long loop test.
ADSL2+ Enabled
The device can support the functions of the ADSL2+.
AnnexM
Covers a higher “upstream” data rate version, by making use
of some of the downstream channels.
Inner Pair
Reserved only
Outer Pair
Reserved only
Bitswap Enable
Allows bitswaping function
SRA Enable
Allows seamless rate adaptation
57
Page 59 / 75
Chapter 7
Diagnostics
The Diagnostics menu provides feedback on the connection status of the CT-5071
and the ADSL link.
The individual tests are listed below. If a test displays a fail
status, click
Rerun Diagnostic Tests
at the bottom of this page to make sure the
fail status is consistent. If the test continues to fail, click
Help
and follow the
troubleshooting procedures.
Test
Description
Ethernet Connection
Pass:
indicates that the Ethernet interface from your
computer is connected to the LAN port of your DSL Router.
A flashing or solid green LAN LED on the router also
signifies that an Ethernet connection is present and that
this test is successful.
Fail:
Indicates that the DSL Router does not detect the
Ethernet interface on your computer.
ADSL
Synchronization
Pass:
Indicates that the DSL modem has detected a DSL
signal from the telephone company.
A solid WAN LED on
the router also indicates the detection of a DSL signal from
the telephone company.
Fail:
indicates that the DSL modem does not detect a
signal from the telephone company’s DSL network.
The
WAN LED will continue to flash green.
58
Page 60 / 75
Chapter 8
Management
The Management section of the CT-5071 supports the following maintenance
functions and processes:
z
System log
z
Update software
z
Restore Settings
z
Local Access
z
User Access
z
Remote Access
8.1 Settings
The Settings option allows you to back up your settings to a file, retrieve the setting
file, and restore the settings.
59
19216811.live