Page 71 / 137
Scroll up to view Page 66 - 70
6.6 Routing
The Routing dialog box allows you to configure Default gateway, Static Route and
RIP.
6.6.1
Default Gateway
If ‘
Enable Automatic Assigned Default Gateway’
checkbox is selected, this
router will accept the first received default gateway assignment from one of the
PPPoA, PPPoE or MER/DHCP enabled PVC(s). If the checkbox is not selected, enter
the static default gateway AND/OR a WAN interface. Click 'Save/Apply' button to
save it.
NOTE:
If changing the Automatic Assigned Default Gateway from unselected to
selected, You must reboot the router to get the automatic assigned default gateway.
70
Page 72 / 137
6.6.2
Static Route
Choose
Static Route
to display the Static Route screen. The Static Route screen
lists the configured static routes, and allows configuring static routes. Choose
Add
or
Remove
to configure the static routes.
To add static route, click the
Add
button to display the following screen. Enter the
destination network address, subnet mask, gateway AND/OR available WAN
interface then click
Save/Apply
to add the entry to the routing table.
71
Page 73 / 137
6.6.3 RIP
To activate RIP for the device, select the 'Enabled' radio button for Global RIP Mode.
To configure an individual interface, select the desired RIP version and operation,
followed by placing a check in the 'Enabled' checkbox for the interface. Click the
'Save/Apply' button to save the configuration, and to start or stop RIP based on the
Global RIP mode selected.
Note
: This screenshot is based on PPPoE encapsulation.
72
Page 74 / 137
6.7 DNS
6.7.1
DNS Server
If 'Enable Automatic Assigned DNS' checkbox is selected, this router will accept the
first received DNS assignment from one of the PPPoA, PPPoE or MER/DHCP enabled
PVC(s) during the connection establishment. If the checkbox is not selected, enter
the primary and optional secondary DNS server IP addresses. Click 'Save' button to
save the new configuration. You must reboot the router to make the new
configuration effective.
73
Page 75 / 137
6.7.2
Dynamic DNS
The Dynamic DNS service allows you to alias a dynamic IP address to a static
hostname in any of the many domains, allowing your DSL router to be more easily
accessed from various locations on the Internet.
To add a dynamic DNS service, simply click the Add button. The following screen will
be displayed:
74
19216811.live