Page 121 / 199 Scroll up to view Page 116 - 120
Cisco ProtectLink Web
Updating the ProtectLink License
Cisco Small Business RV0xx Series Routers Administration Guide
121
8
License
Update Information:
To refresh the license information displayed on-
screen, click
Update Information
.
License Information
View detailed license online:
To view license information online, click this
link. Your web browser opens the
ProtectLink Product Detail
page. You can
close that page when you finish reading the information.
Status:
The status of your license:
Activated
or
Expired
Platform:
The platform type, Gateway Service.
License expires on:
The date and time your license when the license
expires (one year after the service was activated)
Renew:
For information about renewing your license, click
Renew
. After you
purchase an extension key, you can register it and activate your service.
Page 122 / 199
9
Cisco Small Business RV0xx Series Routers Administration Guide
122
VPN
Use the VPN module to configure a Virtual Private Network (VPN) to allow secure
access to your site from other locations. Refer to these topics:
Introduction to VPNs, page 122
Viewing the Summary Information for VPN, page 126
Setting Up a Gateway to Gateway (Site to Site) VPN, page 130
Setting Up a Remote Access Tunnel for VPN Clients (Client To Gateway),
page 139
Managing VPN Users and Certificates, page 147
Setting Up VPN Passthrough, page 149
Setting Up PPTP Server, page 150
Introduction to VPNs
A VPN is a connection between two endpoints in different networks to allow
private data to be sent securely over a shared or public network, such as the
Internet. This tunnel establishes a private network that can send data securely
between these two locations or networks. A VPN tunnel uses industry-standard
encryption and authentication techniques to secure the data sent between the
two networks. It can be used to create secure networks linking a central office
with remote offices, telecommuters, and/or professionals on the road.
There are several ways to create a VPN connection:
Site to Site VPN (Gateway To Gateway), page123
Remote Access (Client To Gateway), page123
Remote Access with Cisco QuickVPN, page125
Remote Access with PPTP, page125
Page 123 / 199
VPN
Introduction to VPNs
Cisco Small Business RV0xx Series Routers Administration Guide
123
9
Site to Site VPN (Gateway To Gateway)
In a site-to-site or gateway-to-gateway VPN, a VPN router at one office connects
to a VPN router at a remotely located office. Client devices can access network
resources as if they were all at the same site. This model can be used for multiple
users at a remote office.
In the following example, the main office (Site A) and a remote office (Site B) are
connected by a VPN tunnel. Users at both sites have access to the network
resources at both sites.
Configuration tasks:
Use the
VPN > Gateway to Gateway
page to configure the VPN tunnel. For
instructions, see
Setting Up a Gateway to Gateway (Site to Site) VPN,
page 130
. For more details and examples, see
Appendix D, “Configuring a
Gateway-to-Gateway VPN Tunnel Between RV0xx Series Routers.”
Remote Access (Client To Gateway)
In a remote access or client-to-gateway VPN, a computer with VPN client software
connects to a VPN router. For this scenario, you can install third-party VPN client
software on the users’ computers. Alternatively, a VPN tunnel can be accessed
from any computer with the built-in IPSec Security Manager (Windows 2000,
Windows XP, and Windows 7).
199468
Site A
RV016
router
RV042
router
Site B
Inside
192.168.1.1/24
Outside
209.165.200.226/24
Outside
209.165.200.236/24
Inside
192.168.2.1/24
Personal
computers
Personal
computers
Printer
Printer
Internet
Page 124 / 199
VPN
Introduction to VPNs
Cisco Small Business RV0xx Series Routers Administration Guide
124
9
You will need to configure this router with the specific IPsec policies required for
the IPsec client. You also will need to install and configure the IPsec client
software on the users’ computers.
NOTE
Consider two other remote access options:
Remote Access with Cisco
QuickVPN, page125
and
Remote Access with PPTP, page125
.
The following is an example of a client-to-gateway VPN. A business traveler
connects to the Internet from her hotel room. Her notebook computer has VPN
client software that is configured with her office’s VPN settings. She accesses the
VPN client software and connects to the VPN router at the central office. Using the
VPN, she now has a secure connection to the central office’s network, as if she
were physically connected.
Configuration tasks:
1.
Use the
VPN > Client to Gateway
page to configure the VPN tunnel with the
settings required by the third-party client, such as TheGreenbow. For
instructions, see
Setting Up a Remote Access Tunnel for VPN Clients (Client
To Gateway), page139
.
2.
Install the client software on the users’ computers.
199469
Outside
209.165.200.226
DNS Server
WINS Server
192.168.1.30
Personal Computer
Using VPN Software Client
Personal Computer
Using VPN Software Client
Personal Computer
Using VPN Software Client
Inside
192.168.1.1
RV0xx
router
Internet
Internal
network
Page 125 / 199
VPN
Introduction to VPNs
Cisco Small Business RV0xx Series Routers Administration Guide
125
9
Remote Access with Cisco QuickVPN
Users with Cisco QuickVPN software can establish a VPN tunnel to your network.
Use this option if you want to simplify the VPN setup process. You do not have to
configure VPN policies. Remote users can connect securely with the Cisco
QuickVPN client and an Internet connection. For information about the benefits and
limitations, see “Easy and Secure Access with Cisco QuickVPN” at
http://
www.cisco.com/en/US/docs/routers/csbr/app_notes/QuickVPN_an_OL-
25680.pdf
Configuration Tasks:
1.
Use the
VPN Client Access
page to add the usernames and passwords.
2.
Optionally, use the
VPN > VPN Client Access
page to generate certificates to
install on the users computers. For more information, see
Certificate
Management, page 148
.
3.
Install Cisco QuickVPN on the users’ computers. To get the software, go to
www.cisco.com/go/software
. Enter the router’s model number in the search
box and then click
Find
. In the list of links, click
Quick Virtual Private Network
(QVPN) Utility
. After downloading the software on the computer, double-click
Setup.exe
to start the installation.
4.
If you generated certificates, copy the certificate to the directory where Cisco
QuickVPN is installed, typically C:\Program Files\Cisco Small
Business\QuickVPN client.
Remote Access with PPTP
A remote user with a Microsoft computer can establish a VPN tunnel by
connecting to a PPTP server at your site. Use this option to simplify VPN setup.
You do not have to configure VPN policies on the router, and there is no need to
install a VPN client on the users’ computers. However, be aware that security
vulnerabilities have been found in this protocol.
Configuration Tasks:
1.
Use the
VPN > PPTP Server
page to enable PPTP server, set the IP address
range for clients, and enter the usernames and passwords.
2.
Distribute the user names and passwords to the users.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top