Cisco M20 Router Manual PDF (Setup & Configuration Guide)

Page 6 / 12 Scroll up to view Page 1 - 5

5

Cisco Connect

/

Update or create an Easy Setup Key

1.

Insert the Easy Setup Key or your own USB flash drive

into an available USB port on your computer. Wait

while the files are copied to the Easy Setup Key.

Update or Create an Easy Setup Key

2. Remove the Easy Setup Key and click

Close

. You can

now use it to connect other computers to the Valet.

Refer to

Connect with the Easy Setup Key

,

page 4

to complete the process of adding another computer.

Easy Setup Key Has Been Updated

Connect without the Easy Setup Key

1. Enter the

Network name (SSID)

,

Security Key

, and

Security Type

settings on your wireless device. To print

this information, click

Print these settings

.

Wireless Network Settings

2.

After connecting your device, click

3.

Enter a name that will be used to identify this device.

Then click

Finish

.

Name Your Device

Wireless printer

1.

Refer to your printer’s documentation to learn how to

connect it to a wireless network.

2. Enter the

Network name (SSID)

,

Security Key

, and

Security Type

settings on your wireless device. To print

this information, click

Print these settings

.

Wireless Network Settings

3.

Wait until your printer connects. On the

Connecting a

wireless printer

screen, click

4.

Enter a name that will be used to easily identify your

printer.

Name Your Printer

Page 7 / 12

6

Cisco Connect

/

Device

1. Enter the

Network name (SSID)

,

Security Key

, and

Security Type

settings on your wireless device. To print

this information, click

Print these settings

.

Wireless Network Settings

2.

After connecting your device, click

3.

Enter a name that will be used to identify the device

and click

Finish

.

Name Your Device

Parental Controls

For the computers you select, you can block or limit

Internet access to specific times. You can also block

specific websites.

Parental Controls Password

First-Time Access of Parental Controls

1. The first time you access parental controls, you will

be asked to create a parental controls password.

Complete the following:

–

Parental controls password

Create a password

of 4-32 characters that protects access to parental

controls.

–

Verify password

Re-enter the password.

–

Secret question

Create a secret question and

answer pair. If you forget the password, you can

reset it by correctly answering the secret question.

Enter your question (up to 64 characters maximum).

–

Answer

Enter the answer to your secret question

(up to 32 characters maximum).

Click

OK

to save your settings.

2.

Select the computer that you want to set up parental

controls for. Then click

OK

.

Set Up Parental Controls For

3. The

Parental controls

main screen appears.

Manage Parental Controls

You have the following options:

Restrict Internet access on

The list of computer(s) you

have selected for parental controls is displayed. To add,

remove, or rename computers on this list, refer to

Restrict

Internet Access List

,

page 7

. To set up parental controls

on a computer, refer to

Set Up Parental Controls

,

page 7

.

Change parental controls password

Click to change

the password that protects access to parental controls.

Refer to

Change Parental Controls Password

,

page 8

.

Page 8 / 12

7

Cisco Connect

/

Restrict Internet Access List

Parental Controls

Add

Click to apply parental control settings to additional

computers.

If you clicked

Add

, the

Set up parental controls for

screen

appears.

Set Up Parental Controls For

Select the computer whose parental controls you want to

set up. Then click

OK

.

Remove

If there is a computer that you want to remove

parental controls from, select the computer and click

Remove

.

Rename

To give a computer a new name, select the

computer and click

Rename

.

If you clicked

Rename

, the

Rename the device

screen

appears.

Rename the Device

Enter the new name. Then click

Rename

.

Set Up Parental Controls

To set up parental controls for a computer, follow these

instructions:

1.

Select the computer from the

Restrict Internet access on

list. (If the computer is not listed, click

Add

to select

the computer.)

Parental Controls

2. The

Block Internet access

option offers the following:

–

Always

Select this option to block Internet access

continuously on the selected computer.

–

Specific times

To block Internet access during

specific days and times on the selected computer,

select this option and set the schedule:

•

School nights

Select the appropriate start and

end times.

•

Weekends

Select the appropriate start and

end times

–

Never

Select this option if you do not want to

restrict access during specific times.

3. The

Block sites inappropriate for

option allows you

to block websites based on content. The following

options are available:

–

Don’t Block

Select this option if you do not want

to restrict access to any websites.

–

Teen

Blocks websites that contain content that

may be inappropriate for teenagers.

–

Child

Blocks websites that contain content that

may be inappropriate for children.

Page 9 / 12

8

Cisco Connect

/

4. For the

Block specific sites

option, click

Edit

to create a

list of websites you want to block. The default is

None

.

If you clicked

Edit

, the

Block these sites

screen appears.

Block These Sites

a.

Enter a website address on each line.

b. Click

Save

to save your settings.

5. On the

Parental controls

screen, click

Finish

to save

your settings.

NOTE:

Repeat steps 1-4 to set up parental

controls for different computers.

Change Parental Controls Password

If you clicked

Change parental controls password

, the

Change your parental controls password

screen appears.

Change Your Parental Controls Password

•

Old password

Enter the current password.

•

New password

Enter a new password that contains

at least 4 characters but doesn’t exceed 32 characters.

•

Verify password

Re-enter the new password.

Click

Change

to save your setting.

Blocked Sites

When you attempt to access a website that has been

blocked on your computer, you will see a screen telling

you that the site has been blocked and the reason it was

blocked. You can override the blocking for an hour by

entering the parental controls password in the

Password

field and clicking

Unblock

. All access restrictions will be

turned off for the hour including any teen or child content

settings or blocked sites.

Blocked Site

Guest Access Settings

Allow guest access

By default,

Guest Access

is enabled.

To disable

Guest Access

, select

no

.

Guest network name

By default, the setup software

sets up the name of the guest network. You can’t change

the Guest Network Name as it is directly tied to the Valet

Name. If you change the Valet Name, it will change the

Guest Network Name. Refer to

Change Valet Name or

Password

,

page 9

Password

By default, the setup software sets up the

password for the guest network. To change the password,

click

Change

.

If you clicked

Change

, the

Change guest password

screen

appears.

Change Guest Password

Page 10 / 12

9

Cisco Connect

/

•

Enter a new guest password

Enter a password of

4-32 characters.

•

Click

Change

to save your setting.

Total guests allowed

By default,

5

guests are allowed

Internet access through your guest network. If you want

to allow more or less, select the desired number of guests

from the drop-down menu ; you can select up to 10 guests.

NOTE:

Computers that are connected to the

local network do not count towards the number

of guests allowed.

Click

Finish

to save your settings.

Valet Settings

Personalize

Valet name

The name of your Valet is displayed (this is

also the name of your wireless network). To change the

name, click

Change

. Refer to

Change Valet Name or

Password

,

page 9

.

Password

The password that protects access to the

Valet’s settings is displayed (this also protects wireless

access to your local network). To change the password,

click

Change

. Refer to

Change Valet Name or Password

,

page 9

.

Easy Setup Key

Update or create key

The Easy Setup Key is a USB flash

drive that holds the settings for the Valet. To create or

update the Easy Setup Key, click

Create or update key

.

For more information, refer to

Update or create an Easy

Setup Key

,

page 5

.

Safe Web Surfing

On/off

Safe web surfing alerts you when you are about

to visit a potentially harmful website. You can choose

whether to visit the site or not. Safe web surfing is enabled

by default.

Other Options

Register now to receive special offers and updates

To

sign up to receive special offers and updates, click this

option.

Valet details

To view more information about the Valet,

click

Valet details

. Refer to

Valet Details

,

page 10

.

Advanced settings

To access settings for advanced

users, click

Advanced settings

. Refer to

Advanced

Settings

,

page 10

.

Click

Finish

to save your settings.

Change Valet Name or Password

NOTE:

If you change the Valet name or

password, then the wireless computers or other

devices connected to the Valet will need to be

reconnected using the new name or password

(for more information, refer to

Computers and

Other Devices

,

page 4

).

If you clicked

Change

, the

Changing Valet name or

password

screen appears.

1. To change the Valet name or password, click

Yes

.

Otherwise, click

No

.

Changing Valet Name or Password

2. Complete the following:

•

Valet name

Enter a name of 1-32 characters.

•

Password

Enter a password of 8-63 characters.

•

Click

Change

to save your settings.

Changing Valet Name and Password

Rate

Popular Cisco Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share