Page 46 / 68 Scroll up to view Page 41 - 45
Chapter 3
Operation of Front Panel Indicators
24
OL-29161-01
Normal Operations (AC Power Applied)
The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel Indicator
Normal Operations
1
POWER
On
2
DS
On
3
US
On
4
ONLINE
On
5
ETHERNET 1-
4
On - When a single device is connected to the Ethernet
port and no data is being sent to or from the residential
gateway
Blinks - When only one Ethernet device is connected and
data is being transferred between the consumer premise
equipment (CPE) and the wireless home gateway
Off - When no devices are connected to the Ethernet ports
6
USB
On - When a single device is connected to the USB port
and no data is being sent to or from the modem
Blinks - When only one USB device is connected and data
is being transferred between the consumer premise
equipment (CPE) and the wireless home gateway
Off - When no devices are connected to the USB ports
7
WIRELESS
ON/OFF
On - When the wireless access point is enabled and
operational
Blinks - When data is being transferred between the CPE
and the wireless home gateway
Off - When the wireless access point is disabled by the
user
8
WIRELESS
SETUP
Off - When wireless setup is not active
Blinks - When wireless setup is active to add new wireless
clients on the wireless network
9
TEL 1
On - When telephony service is enabled
Blinks - When line 1 is in use
10
TEl 2
On - When telephony service is enabled
Blinks - When line 2 is in use
Page 47 / 68
Normal Operations (AC Power Applied)
OL-29161-01
25
11
BATTERY
(Optional for
some models)
On – When battery is charged
Blinks – When battery charge is low
Off – When there is no battery in the unit
Note
: In addition to the status shown in the previous table, some service providers
use color-coded LEDs to indicate detailed channel bonding and data link status. For
additional information about color-coded LEDs, check with your service provider.
Page 48 / 68
Chapter 3
Operation of Front Panel Indicators
26
OL-29161-01
Special Conditions
The following chart describes the appearance of the residential gateway front panel
LED status indicators during special conditions to show when you have been denied
network access.
Front Panel LED Status Indicators During Special Conditions
Front Panel Indicator
Network Access Denied
1
POWER
Slow Blinking
(once per second)
2
DS
Slow Blinking
(once per second)
3
US
Slow Blinking
(once per second)
4
ONLINE
Slow Blinking
(once per second)
5
ETHERNET 1-
4
Slow Blinking
(once per second)
6
USB
Slow Blinking
(once per second)
7
WIRELESS
ON/OFF
Slow Blinking
(once per second)
8
WIRELESS
SETUP
Slow Blinking
(once per second)
9
TEL 1
Off
10
TEL 2
Off
11
BATTERY
(Optional for
some models)
On
Page 49 / 68
OL-29161-01
27
Introduction
This chapter describes how to maintain and replace the battery that is
included with the residential gateway.
4
Chapter 4
Maintaining the Battery
In This Chapter
Location of the Battery
.......................................................................
28
Battery Maintenance
..........................................................................
29
Page 50 / 68
Chapter 4
Maintaining the Battery
28
OL-29161-01
Location of the Battery
The following illustration shows the location of the battery.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top