Page 76 / 106 Scroll up to view Page 71 - 75
76
4021192 Rev B
Configure Applications and Gaming
Section
Field Description
End Port
For the End port, select a port from the recommended 49152 -
65535 range. Keep in mind that ports used are program specific
so check which ones the program requires to be forwarded.
Protocol
Select one of the following protocols:
TCP
UDP
Both
Enable
Click the Enable checkbox to enable port range triggering for
the relevant application.
Applications & Gaming > DMZ
Use this page to configure an IP address whose ports are directly exposed to the
public Internet or to the Wide Area Network (WAN). Demilitarized Zone (DMZ)
hosting is commonly referred to as "exposed host," and allows you to specify a
recipient of WAN traffic that Network Address Translation (NAT) is unable to
translate to a known local PC.
A DMZ is typically used by a company that wants to host its own Internet server.
DMZ allows one IP address to be placed on the Internet side of the gateway firewall
while others remain protected behind the firewall.
The DMZ allows a device to be directly accessible to Internet traffic, such as a web
(HTTP) server, an FTP server, an SMTP (e-mail) server, and a domain name system
(DNS) server. Select the
DMZ
tab to open the Applications & Gaming DMZ page.
Page 77 / 106
4021192 Rev B
77
Configure Applications and Gaming
Applications and Gaming DMZ Page Description
Use the descriptions and instructions in the following table to configure the port
range triggering for the residential gateway. Select enable for each DMZ Host IP
address. After you make your selections, click
Save Settings
to apply your changes
or
Cancel Changes
to cancel.
Section
Field Description
DMZ
DMZ Hosting
Select the desired option:
Enable
Disable
(factory default)
DMZ Host IP Address
DMZ allows one IP address to be unprotected while others remain
protected. Enter the IP address of the computer you want to
expose to the Internet in this field.
Page 78 / 106
78
4021192 Rev B
Manage the Gateway
Manage the Gateway
Administration > Management
The Administration Management page allows the network’s adminis
trator to
manage specific gateway functions for access and security. Select the
Management
tab to open the Administration Management page.
Important:
The following page displays when
DHCP
(factory default) is the
Connection Mode. The page that displays when
Static IP
is selected is shown and
described later in this section.
Administration Management Page Description
Use the descriptions and instructions in the following table to configure the
administration management for the residential gateway when DHCP or Static IP
connection mode is selected. After you make your selections, click
Save Settings
to
apply your changes or
Cancel Changes
to cancel.
Page 79 / 106
4021192 Rev B
79
Manage the Gateway
Field
Description
Gateway Setup
(WAN)
Internet Connection
Type
Connection Mode
This setting allows you to determine how the
WAN (or gateway interface to the Internet) obtains its IP address.
DHCP
(factory default)
Allows the gateway to obtain a public IP address automatically
Static IP
Allows you to specify the WAN IP address and corresponding
server information as static or fixed values that will be used
whenever the gateway goes online
Page 80 / 106
80
4021192 Rev B
Manage the Gateway
Field
Description
MTU
Gateway Access
Local Access
Internet IP Address
Enter the gateway’s IP address (as seen from the Internet)
Subnet Mask
Enter the gateway’s subnet
mask (as seen from the Internet,
including your service provider)
Default Gateway
Enter the default gateway of the service provider’s server
Primary DNS
Enter the primary domain name server IP address(es) provided by
your service provider. This is required.
Secondary DNS
Enter the secondary domain name server IP address(es) provided
by your service provider. This is optional.
MTU size
MTU is the Maximum Transmission Unit. The MTU size specifies
the largest packet size permitted for Internet transmission. . The
factory default = 0 (1500 bytes)
Current User Name
Identifies the currently logged in user
Change Current User Name to
This field allows you to change your user name. If you want to
change your user name, enter your new user name in this field
and click
Save Settings
to apply the change.
Note:
The factory default user name is a blank field.
Change Password to
This field allows you to change your password. If you want to
change your password, enter your new password in this field.
Then, re-enter your new password in the
Re-Enter New Password
field and click
Save Settings
to apply the change.
Note:
The factory default password is a blank field.
Re-Enter New Password
Allows you to re-enter the new password. You must enter the
same password as the one entered in the previous field
Change
Password to
. After you re-enter your new password, click
Save
Settings
to apply the change.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top