Page 86 / 99
Scroll up to view Page 81 - 85
Appendix B
Default Configuration Settings
WBMR-HP-GNV2 User Manual
85
Feature
Parameter
Default Setting
VPN Pass
Through
(Router Mode only)
PPPoE Pass Through
Disabled
PPTP Pass Through
Disabled
Port Forwarding
(Router Mode only)
Port Forwarding Registration
Information
none
DMZ
(Router Mode only)
IP Address of DMZ
none
UPnP
(Router Mode only)
UPnP
Enabled
QoS
(Router Mode only)
QoS for transmission to the
Internet
Disabled
Name
AirStation Name
AP + AirStation's MAC Address
Password
Administrator Name
root (fixed)
Administrator Password
none
Time/Date
Local Date
2010 Year 1 Month 1 Day
Local Time
0 Hour 0 Minute 0 Seconds
Time Zone
(GMT+00:00) Greenwich Mean Time, London
NTP
NTP Functionality
Disabled
NTP Server
time.nist.gov
Update Interval
24 hours
ECO
Schedule Feature
Disabled
Register schedule
Operational Mode:
Normal
Start time:
0:00
End time:
0:30
The day of week:
none
User Define Mode
LED:
Off
Wired LAN:
ECO (Slow operation)
Wireless LAN:
Off
Access
Log Output
Disable
Limitation Item
Prohibit configuration from wireless LAN
Disabled
Prohibit configuration from wired LAN
Disabled
Permit configuration from wired Internet Disabled
Page 87 / 99
WBMR-HP-GNV2 User Manual
86
Appendix B
Default Configuration Settings
Feature
Parameter
Default Setting
Log
Log Transfer
Disabled
Syslog Server
none
Transfer Logs
Address Translation, IP Filter, Firewall, PPPoE Client,
Dynamic DNS, DHCP Client, DHCP Server, AOSS,
Wireless Client, Authentication, Setting Changes,
System Boot, NTP Client, and Wired Link
Page 88 / 99
WBMR-HP-GNV2 User Manual
87
Appendix C - TCP/IP Settings
Windows 7
To configure TCP/IP in Windows 7, follow the procedure below.
1
Click [Start] > [Control Panel] > [Network and Internet].
2
Click [Network and Sharing Center].
3
Click [Change Adapter Settings] on the left side menu.
4
Right-click on [Local Area Connection], then click [Properties].
5
If the User Account Control screen opens, click [Yes] or [Continue].
6
Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
7
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting.
Examples:
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
192.168.11.1
Preferred DNS server
192.168.11.1
Alternate DNS server
blank
8
Click [OK].
Page 89 / 99
WBMR-HP-GNV2 User Manual
88
Appendix C
TCP/IP Settings
Windows Vista
To configure TCP/IP in Windows Vista, follow the procedure below.
1
Click [Start] > [Settings] > [Control Panel].
2
Click [Network and Sharing Center].
3
Click [Manage network connections] on the left side menu.
4
Right-click on [Local Area Connection], then click [Properties].
5
If the User Account Control screen opens, click [Yes] or [Continue].
6
Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].
7
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each settings.
Example:
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
192.168.11.1
Preferred DNS server
192.168.11.1
Alternate DNS server
blank
8
Click [Close].
Page 90 / 99
Appendix C
TCP/IP Settings
WBMR-HP-GNV2 User Manual
89
Windows XP
To configure TCP/IP in Windows XP, follow the procedure below.
1
Click [Start] > [Settings] > [Control Panel].
2
Double-click [Network].
3
Right click on [Local Area Connection], then click [Properties].
4
Select [Internet Protocol (TCP/IP)], then click [Properties].
5
To have DHCP set your IP address settings automatically, check [Obtain an IP address
automatically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting.
Examples:
IP address
192.168.11.80
Subnet mask
255.255.255.0
Default gateway
192.168.11.1
Preferred DNS server
192.168.11.1
Alternate DNS server
blank
6
Click [Close].