Page 71 / 99
Scroll up to view Page 66 - 70
WBMR-HP-GNV2 User Manual
70
Chapter 5
Connect to a Wireless Network
2
Windows XP (Client Manager 3)
If you are using Windows XP, use Client Manager 3 to connect wirelessly with AOSS/WPS.
1
Right click on the
icon in the system tray, and select [Profile].
Click the [WPS AOSS] button.
Follow any instructions displayed on the screen. When the Security LED on the front of the
AirStation stops flashing and is lit steadily, the connection is complete.
Other Devices (e.g. Game Console)
If you are using a game machine which supports AOSS or WPS, refer to that device’s manual to
initiate AOSS/WPS.
When instructed, hold down the AOSS button on the AirStation for 1 second.
When the Security LED stops blinking and is lit steadily, the connection is complete.
Page 72 / 99
Chapter 5
Connect to a Wireless Network
WBMR-HP-GNV2 User Manual
71
Manual Setup
You can also connect to the AirStation without installing Client Manager V or Client Manager 3 by
using the utility built-in to Windows.
The procedure varies depending on which version of Windows
you are using.
Note:
· If the AirNavigator CD is used to perform setup when making the initial settings of AirStation, the
wireless connection settings for the AirStation are completed during the Setup process. As a result, you
do not need to make the settings below. After setup is complete, once the LAN cable is removed, you
can connect from your wireless client to the AirStation.
· Before performing setup, make the settings to enable the wireless client of the computer.
Windows 7 (WLAN AutoConfig)
With Windows 7, use WLAN AutoConfig to connect to the AirStation.
1
Click on the network icon
in the system tray
.
2
Select the target AirStation’s name and click
[Connect]. If you will be connecting to this
device in the future, checking [Connect
automatically] is recommended.
Page 73 / 99
WBMR-HP-GNV2 User Manual
72
Chapter 5
Connect to a Wireless Network
3
Enter the encryption key and click [OK].
1
Right click on the wireless network icon
in the system tray
.
2
Click [Connect to a network].
When the screen at left is displayed, select the
network to connect to and click [Connect].
3
Windows Vista (WLAN AutoConfig)
With Vista, use WLAN AutoConfig to connect to the AirStation.
Page 74 / 99
Chapter 5
Connect to a Wireless Network
WBMR-HP-GNV2 User Manual
73
If the screen below is displayed, click [I want to enter the network key or passphrase instead].
Otherwise, go to step 4.
Page 75 / 99
WBMR-HP-GNV2 User Manual
74
Chapter 5
Connect to a Wireless Network
Enter the encryption key and click [Connect].
4
Step through the wizard to finish configuration.
If the Set Network Location screen is displayed,
select [Home], [Work], or [Public location] depending where you’re using the AirStation.
19216811.live