Page 56 / 145
Scroll up to view Page 51 - 55
Chapter 4
Configuration
WBMR-HP-G300H User Manual
55
Parameter
Meaning
Protocol
Select the Internet side protocol (before translation) for the port
translation table entry.
LAN Side IP Address
Enter the LAN side IP address (after translation) for the port
translation table entry.
LAN Side Port
Select the LAN side (after translation) port number (1 - 65535) for
the port translation table entry.
Port Forwarding Registration
Information
Shows current entries in the port translation table.
Page 57 / 145
WBMR-HP-G300H User Manual
56
Chapter 4
Configuration
DMZ (Router Mode only)
Configure a destination to transfer communication packets without a LAN side destination to.
Parameter
Meaning
IP Address of DMZ
Enter the IP address of the destination to which packets which are
not routed by a port translation table are forwarded.
Note: RIP protocol packets (UDP port number 520) will not be
forwarded.
Page 58 / 145
Chapter 4
Configuration
WBMR-HP-G300H User Manual
57
UPnP (Router Mode only)
Configure UPnP (Universal Plug and Play).
Parameter
Meaning
UPnP
Enable or disable Universal Plug and Play (UPnP) functionality.
Page 59 / 145
WBMR-HP-G300H User Manual
58
Chapter 4
Configuration
QoS (Router Mode only)
Configure the priority of packets sent to the Internet.
Parameter
Meaning
QoS for transmission to the Internet
Determine whether or not to prioritize packets sent to the Internet.
Check this box to enable QoS.
Upload bandwidth
Specify the upstream bandwidth in kbps from the AirStation to the
internet side.
Set the actual value for the upstream bandwidth.
Enable
Enable or disable this entry.
application name
Enter an application name. Names may use up to 32 alpha
numerical characters, double or single tick marks ("'), quotation
marks (“), and semicolons (;).
protocol
Select either TCP or UDP.
Page 60 / 145
Chapter 4
Configuration
WBMR-HP-G300H User Manual
59
Parameter
Meaning
destination Port
Specify a destination port with the value of 1 - 65535. If this field is
empty, a random port is selected.
priority
Select high, medium or low.
If packets do not qualify for classification
as a type on the list, then their priority is treated as a level between
medium and low.
19216811.live