Page 51 / 145
Scroll up to view Page 46 - 50
WBMR-HP-G300H User Manual
50
Chapter 4
Configuration
Security (Router Mode only)
Firewall (Router Mode only)
Configure the AirStation’s firewall.
Parameter
Meaning
Log Output
Enable to output a log of firewall activity.
Basic Rules
Enable to use any of the quick filters. Preconfigured quick filters
include:
Prohibit NBT and Microsoft-DS Routing
When this is enabled, you cannot use the Microsoft network
feature from the Internet side to the LAN side and from the LAN
side to the Internet.
Page 52 / 145
Chapter 4
Configuration
WBMR-HP-G300H User Manual
51
Parameter
Meaning
Reject IDENT Requests
Enabling this option will answer IDENT requests from the Internet
side with corresponding rejection packets. Enable this option if
you experienced slower transfer speed for network application
such as sending mail, using ftp or displaying on browser. If
you have configured transfer of IDENT requests to the LAN
side computer in the address translation settings (DMZ or TCP
port:113), then that setting has higher priority, and overrides this
setting.
Block Ping from Internet
If this is enabled, the AirStation will not respond to pings from the
Internet side.
Page 53 / 145
WBMR-HP-G300H User Manual
52
Chapter 4
Configuration
IP Filter (Router Mode only)
Edit IP filters.
Parameter
Meaning
Log Output
If enabled, IP filter activity is saved to a log.
Operation
Specify how to process target packets.
Direction
Specify the transmission direction of target packets.
IP Address
Specify the sender's IP address and receiver's IP address of the
target packets.
Protocol
Select a protocol for target transmission packet.
IP Filter Information
Display the list of IP filters which have been registered.
Page 54 / 145
Chapter 4
Configuration
WBMR-HP-G300H User Manual
53
VPN Pass Through (Router Mode only)
Configure IPv6 pass through, PPPoE pass through, and PPTP pass through.
Parameter
Meaning
IPv6 Pass-through
Enable to use IPv6 pass-through for address translation.
PPPoE Pass-through
Enable to use PPPoE bridge. Using PPPoE bridge lets you
automatically obtain an IP address from your provider using the
PPPoE protocol from your computer connected to the LAN side
because all PPPoE packets can pass through between the Internet
and LAN.
PPTP Pass-through
Enable to use PPTP pass-through for address translation.
Page 55 / 145
WBMR-HP-G300H User Manual
54
Chapter 4
Configuration
LAN Config (QoS)
Port Forwarding (Router Mode only)
Configure port translation.
Parameter
Meaning
Group
Specify a group name for a new rule to belong to. Select [New
Group] and enter the new group name in the Group Name
field to create a new group. A group name can include up to 16
alphanumeric letters.
Internet Side IP Address
Enter the Internet side IP address (before translation) for the port
translation table entry.
19216811.live