Page 81 / 121
Scroll up to view Page 76 - 80
WBMR-G54 Wireless ADSL Router User Guide
RIP
The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your local
network or remote LAN.
RIP System Wide Configuration window
To enable RIP, select
Enabled
from the
RIP
pull-down menu, select the
Protocol
(
RIPv1
and
RIPv1 Compatible
) and
Direction
(
In
,
Out
, or
Both
), and click
Apply
.
The RIPv1 Compatible option will transmit RIPv2 broadcast packets and receive both RIP v1 and RIP v2 packets.
The direction configuration refers to the RIP request. Select In to allow RIP requests from other devices. Select Out to
instruct the Router to make RIP requests for routing tables from other devices. Select
Both
to share routing tables in
both directions.
71
Downloaded from
www.Manualslib.com
manuals search engine
Page 82 / 121
WBMR-G54 Wireless ADSL Router User Guide
ADSL
The
ADSL Configuration
window allows the user to set the configuration for ADSL protocols. For most ADSL
accounts the default settings
ADSL2+(Multi-mode)
will work. This configuration works with all ADSL
implementations. If you have been given instructions to change the Modulation method used, select the desired option
from the
Modulation Type
drop-down menu and click the
Apply
button.
72
Downloaded from
www.Manualslib.com
manuals search engine
Page 83 / 121
WBMR-G54 Wireless ADSL Router User Guide
ADSL Configuration window
73
Downloaded from
www.Manualslib.com
manuals search engine
Page 84 / 121
WBMR-G54 Wireless ADSL Router User Guide
ATM VCC
The
ATM VC Setting
window is used to configure the WAN connection. If you are using multiple PVCs, you can
change the configuration of any PVC in this window. To create new or additional PVCs, read the section on Multiple
PVCs on page 53.
This window can be used as an alternative to configure the same settings found on the WAN Settings window in the
Home
directory.
ATM VC Setting window
To configure an existing PVC configuration set, click the corresponding notepad icon in the right-hand column of the
ATM VCs List. The PVCs current settings appear above in the entry fields of the
ATM VC Setting
window. Configure
the appropriate settings and click the
Apply
button to put the new settings into effect.
74
Downloaded from
www.Manualslib.com
manuals search engine
Page 85 / 121
WBMR-G54 Wireless ADSL Router User Guide
QoS
QoS or Quality of Service is used to allot priority from the Router. This is done by allotting a priority from a port to a
PVC. There are four priorities for each QoS configuration. “1” denotes the highest priority while “4” is the lowest.
The
IGMP Proxy/Snooping
is Disabled by default. This setting will not allow IGMP (Internet Group Management
Protocol) packets to be forwarded to the LAN. IGMP is used to manage multicasting on TCP/IP networks, most users
will not need to enable this. Some ISPs use IGMP to perform remote configuration for client devices, such as the
Router. If you are unsure, check with your ISP. To enable IGMP service to the LAN interface, select Enabled and click
the
Apply
button
QoS Configuration window
To set QoS for the router, first click the
PortMapping QoS
check box in the middle of the window. This will open the
following window. Then select the PVC to associate with the corresponding port and choose a priority for this
combination. The user may also enable IGMP Proxy/Snooping for each PVC at the top of the window by choosing the
PVC from the pull-down menu and clicking the
Enabled
radio button, set a maximum
Bandwidth
in kbps from
Auto
to
1024
using the drop-down menu. Click
Apply
to set the configuration.
75
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live