1. Home
    2. /
  2. Manuals
    3. /
  3. Buffalo
    4. /
  4. WBMR-G54
    5. /
  5. 13
Page 61 / 121 Scroll up to view Page 56 - 60
WBMR-G54 Wireless ADSL Router User Guide
Note: Dynamic DNS requires that an account be setup with one of the supported DDNS servers prior to engaging it on
the router. This function will not work without an accepted account with a DDNS server.
Enter the required DDNS information and click
Apply
to set this information in the Router.
ATM VC Parameters
Description
DDNS Server
Select one of the DDNS registration organizations form those listed in the
pull-down menu. Available servers include DynDns.org and No-IP.com.
Username
(or Key)
Enter the username given to you by your DDNS server.
Password
(or Key)
Enter the password or key given to you by your DDNS server
Host Name
Enter the host name of the DDNS server.
51
Downloaded from
www.Manualslib.com
manuals search engine
Page 62 / 121
WBMR-G54 Wireless ADSL Router User Guide
Save Settings and Reboot
When you have configured the WBMR-G54 with the settings you desire, make sure you save those settings. To save the
system configuration settings, click the
Tools
tab. You will be presented first with the
Administrator Settings
window.
This window is described in the next chapter. To save the current configuration, click the
System
button to view the
System Settings
window pictured here.
System Settings window
To save the settings you have configured, click the
Save and Reboot
button under Save Settings and Reboot the
System.
52
Downloaded from
www.Manualslib.com
manuals search engine
Page 63 / 121
WBMR-G54 Wireless ADSL Router User Guide
Multiple Virtual Connections
The Router supports multiple virtual connections. Up to eight PVCs to eight separate destinations can be created and
operated simultaneously utilizing the same bandwidth. Additional PVC connections can be added for various purposes.
For example, you may want to establish a private connection to remote office in order to create an extended LAN, or
setup a server on a separate connection. Provisioning for additional PVC profiles must be done through your
telecommunications services provider. Extended LAN operations employing multiple virtual connections require ADSL
routers or modems at the remote site for a successful connection. Contact your ISP or telecommunications service
provider if you are interested in setting up multiple virtual connections.
After the necessary arrangements have been made to use the Router with multiple virtual connections, follow the
instructions below to setup the Router using the VPI/VCI settings given to you by your server provider.
Configure Multiple PVCs
Additional PVCs can be configured by first accessing the WAN configuration window in the
Home
directory.
Select new PVC to configure in the WAN Settings window
53
Downloaded from
www.Manualslib.com
manuals search engine
Page 64 / 121
WBMR-G54 Wireless ADSL Router User Guide
The PVC pull-down menu offers eight virtual connections available for configuration. The default PVC used by the
Router is labeled Pvc0. Any additional connections that are configured must have a VPI/VCI combination that is unique
to the Router. These numbers will have been already been established by your service provider on their network.
To add a new virtual connection:
1.
Select the new
PVC
to configure from the pull-down menu.
2.
Enter the values for the
VPI
and
VCI
given to you by your service provider.
3.
To activate the VC, select
Enabled
from the
Virtual Circuit
pull-down menu.
4.
Configure the
WAN Settings
and
Connection Type
as desired.
5.
To save the new settings, click the
Save and Reboot
button (
Tools > System
). The new connection will
activate upon restarting.
In the example below, a new PVC (
Pvc1
) has been added using the WAN Settings window. The connection is setup as a
bridged connection.
Configure new PVC
The new PVC that appears can be configured separately in other windows availailable in the
Advanced
directory.
54
Downloaded from
www.Manualslib.com
manuals search engine
Page 65 / 121
WBMR-G54 Wireless ADSL Router User Guide
4
Advanced Router Management
Directory
Configuration and Read-only Windows
Home
Click the Home tab to access the Setup Wizard, Wireless Settings, WAN
Settings, LAN Management IP Configuration, DHCP Settings for LAN Setup,
DNS Configuration, and Dynamic DNS Configuration windows. See the
previous chapter for a description of the Home directory windows.
Advanced
Click the Advanced tab to access the UPnP, Virtual Server, LAN Clients,
SNMP Management, Filters, Bridge Filters, (Static) Routing Table, DMZ,
Firewall Configuration, RIP Systemwide Configuration, PPP, ADSL
Configuration, ATM VC Setting, QoS Configuration, Wireless Management,
This chapter introduces and describes
the management features that have
not been presented in the previous
chapter. These include the
more
advanced features used for network
management and security as well as
administrative tools to manage the
Router, view statistics and other
information
used
to
examine
performance and for troubleshooting.
Use your mouse to click the directory
tabs and window buttons in order to
display the various configuration and
read-only windows discussed below.
The table below summarizes again the
directories and menus available in the
management web interface. In this
chapter you will find descriptions for
the windows located in the Advanced,
Tools and Status directories.
55
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Buffalo Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top