Page 96 / 121
Scroll up to view Page 91 - 95
WBMR-G54 Wireless ADSL Router User Guide
Change System Password
Under the Administrator heading, type the
New Password
and
Confirm Password
to be certain you have typed it
correctly. Click the
Apply
button to activate the new password. The System User Name remains “admin”, this cannot
be changed using the web manager interface. Be sure to save the new setting.
top section of the Administrator Settings window
Remote Web Management and Remote Telnet Access
The
Administrator Settings
window is also used to enable remote Telnet management and remote web management
access to the Router. To enable remote management of the Router, select the
State
Enabled radio button for either
Remote Web Management or Remote Telnet Management and type the IP Address and Netmask of the remote network
or system used for management. Click the
Apply
button to activate remote management from the chosen IP address. Be
sure to save the new setting.
bottom section of the Administrator Settings window
86
Downloaded from
www.Manualslib.com
manuals search engine
Page 97 / 121
WBMR-G54 Wireless ADSL Router User Guide
Time
The Router provides a number of options to maintain current date and time including SNTP.
Time window
To configure system time on the Router, select the method used to maintain time. The options available include SNTP,
using your computer’s system clock (default) or set the time and date manually. If you opt to use SNTP, you must enter
the SNTP server URL or IP address. Click the
Apply
button to set the system time.
87
Downloaded from
www.Manualslib.com
manuals search engine
Page 98 / 121
WBMR-G54 Wireless ADSL Router User Guide
Remote Log
Us the
Remote Log Settings
window to set up logging to servers or computers that are located outside the LAN or
subnet of the Router.
Remote Log Settings window
Select the
Log Level
from the pull-down menu. The levels available are:
Alert, Critical, Debug, Error, Info, Notice,
Panic
and
Warning.
Type in the IP address of a receiver for the log message in the
Add an IP Address
field and click
on the
Add
button. Log message receivers that are added appear listed in the
Select a logging destination
pull-down
menu. These may be used at any time for other types of log messages. To remove a log message receiver from the list,
select it and click on the
Remove
button. Click the
Apply
button when you have configured the log message receivers.
Remember to save the settings to non-volatile memory.
88
Downloaded from
www.Manualslib.com
manuals search engine
Page 99 / 121
WBMR-G54 Wireless ADSL Router User Guide
System
Save or Load Configuration File
Once you have configured the Router to your satisfaction, it is a good idea to back up the configuration file to your
computer. To save the current configuration settings to your computer, click the
System
button in the
Tools
directory to
display the
System Settings
window. Click the
Save
button to Save Settings to Local Hard Drive. You will be
prompted to select a location on your computer to put the file. The file type is .xml (HTML) and may be named
anything you wish.
To load a previously saved configuration file, click the
Browse
button and locate the file on your computer. Click the
Load
button to Load Settings From Local Hard Drive. Confirm that you want to load the file when prompted and the
process is completed automatically. The Router will reboot and begin operating with the configuration settings that have
just been loaded.
89
Downloaded from
www.Manualslib.com
manuals search engine
Page 100 / 121
WBMR-G54 Wireless ADSL Router User Guide
System Settings window
Restore Factory Default Settings
To reset the Router to its factory default settings, click the
Restore
button. You will be prompted to confirm your
decision to reset the Router. The Router will reboot with the factory default settings including IP settings (192.168.1.1)
and Administrator password (admin).
90
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live