Page 136 / 171
Scroll up to view Page 131 - 135
Chapter 5
Connect to a Wireless Network
WZR-HP-AG300H User Manual
101
If the screen below is displayed, click [I want to enter the network key or passphrase instead].
Otherwise,go to step4.
Page 137 / 171
WZR-HP-AG300H User Manual
102
Chapter 5
Connect to a Wireless Network
4
Enter the encryption key and click [Connect].
Step through the wizard to finish configuration.
If the Set Network Location screen is displayed, select [Home], [Work], or [Public location] depending
on where you’re using the AirStation.
Page 138 / 171
Chapter 5
Connect to a Wireless Network
WZR-HP-AG300H User Manual
103
Windows XP (Wireless Zero Configuration)
Windows XP includes Wireless Zero Config, a built-in utility to connect to your AirStation.
Note:
If Client Manager 3 is installed on your computer, Wireless Zero Config is disabled.
Uninstall Client
Manager 3 to use Wireless Zero Config, or just use Client Manager 3 to connect to the AirStation.
1
Right click on the
wireless network icon in the system tray.
2
Click [View Available Wireless Networks].
3
4
It will take several seconds for configuration to complete.
Select the network to connect to and click
[Connect].
Enter the encryption key (twice) and click
[Connect].
Page 139 / 171
WZR-HP-AG300H User Manual
104
Chapter 5
Connect to a Wireless Network
Mac OS X (AirPort)
Use AirPort on a Mac to connect to the AirStation.
1
2
3
4
It will take several seconds for configuration to complete.
Refer to the label on the side of the AirStation.
Make a note of the SSID and KEY printed on the
label.
Click the
icon in the top
section of the screen and select
[Turn Airport On].
Find the SSID from step 1 on the list.
Click it to highlight it.
Enter the KEY from step 1 into
the Password entry box, check
[Remember this network], and click
[OK].
Page 140 / 171
WZR-HP-AG300H User Manual
105
Chapter 6 - Troubleshooting
Cannot connect to the Internet over wired connection.
• Make sure that your AirStation is plugged in!
• Check that the status LEDs of your AirStation are lit as below:
Power
Green light is ON
Router
Green light is ON or OFF (depending on your environment)
Diag
OFF
LAN
Green light is ON or flashing
Internet
Green light is ON or flashing
• Make sure that your computer is set to [obtain an IP address automatically]. (See appendix D)
• Restart your AirStation.
Cannot access the web-based configuration Interface.
• See chapter 4 for instructions to open the AirStation’s configuration interface.
• Enter the correct username and password to login to the configuration interface.
The factory
defaults are “root” (in lower case) for the username and a blank password (enter nothing).
If you
changed the password, enter the new password that you set.
• Verify that your web browser is not set to use proxies.
• Make sure that your computer is configured to [Obtain an IP Address Automatically.] (See appendix
D)
• Restart your AirStation.
19216811.live