19216811.liveWR1500N
150Mbps Wireless N Router
Figure 4-3
WPS
WPS Status -
Enable or disable the WPS function here.
Current PIN -
The current value of the Router's PIN is displayed here. The default PIN of the
Router can be found in the label or User Guide.
Restore PIN -
Restore the PIN of the Router to its default.
Gen New PIN -
Click this button, and then you can get a new random value for the Router's
PIN. You can ensure the network security by generating a new PIN.
Add device -
You can add a new device to the existing network manually by clicking this
button.
b)
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
For the configuration of the new device, here we take the Wireless Adapter of our company for
example.
I.
By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1:
Press the WPS/Reset Button on the front panel of the Router.
Note:
When press and hold the WPS/Reset Button for more than 5 seconds, you will reset the router.
Step 2:
Press and hold the WPS Button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
- 15 -
Downloaded from
www.Manualslib.com
manuals search engine