17

Configuring PC in Windows XP

1. Go to Start > Control Panel (in Classic

View). In the Control Panel, double-click

on Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and

click Properties.

5. Select the Obtain an IP address auto-

matically and the Obtain DNS server

address automatically radio buttons.

6.

Click OK to finish the configuration.

18

Configuring PC in Windows 2000

1. Go to Start > Settings > Control Panel.

In the Control Panel, double-click on

Network and Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window click Properties.

4. Select Internet Protocol (TCP/IP) and

click Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6.

Click OK to finish the configuration.

19

Configuring PC in Windows 95/98/Me

1. Go to Start > Settings > Control Panel.

In the Control Panel, double-click on

Network and choose the Configuration

tab.

2. Select TCP/IP > NE2000 Compatible,

or the name of your Network Interface

Card (NIC) in your PC.

3. Select the Obtain an IP address auto-

matically radio button.

4.

Then select the DNS Configurationtab.

5. Select the Disable DNS radio button

and click OK to finish the configuration.

20

Configuring PC in Windows NT4.0

1. Go to Start > Settings > Control Panel.

In the Control Panel, double-click on

Network and choose the Protocols tab.

2. Select TCP/IP Protocol and click Prop-

erties.

3. Select the Obtain an IP address from

a DHCP server radio button and click

OK.

21

Factory Default Settings

Before configuring your

router, you need to know the following default settings.

Web Interface (Username and Password)

Three user levels are provided by this router, thus Administrator, Basic and Advanced respectively.

You can turn to User Management to change the corresponding passwords and get more.

Administrator

Username: admin

Password: admin

Basic(local)

Username: user

Password: user

Advanced (for remote login)

Username: support

Password: support

Device LAN IP settings

IP Address: 192.168.1.254

Subnet Mask: 255.255.255.0

ISP setting in WAN site

PPPoE

DHCP server

DHCP server is enabled.

Start IP Address: 192.168.1.100

IP pool counts: 100